Chimera7 Pro V2 GPS ANALOG

SKU

  • Flash Sale

0
0
0
0
Days
0
0
Hrs
0
0
Min
0
0
Sec

About

Description

Smooth and Powerful XING2 Motors
The latest upgrade of our bestseller XING motors, no compromises taken! Durable unibell (one-piece bell) technology, strong titanium alloy shaft with reinforced bell joint, crash resistant 7075 aluminum bell, smooth and long-lasting Japanese NSK bearings, center slotted N52H curved arc magnets, and our XING O-ring bushing gap protection.
Latest Chimera7 Pro Frame for Maximum Protection
The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts.
Secured Battery Plug with Anti-Spark Filter
Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage.
GPS Pre-Installed for More Safety at A Distance
GPS functionality to find your way back and Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behaviour; Setup instructions included). Custom iFlight 100mm LR antenna for best signal coverage even at long distances.
 
Specifications:
Product Name: Chimera7 Pro V2 6S Analog
FC: BLITZ F722 Flight Controller
ESC: BLITZ E55 4-IN-1 2-6S 55A ESC
Video Transmission: /BLITZ Whoop 1.6W VTX/ BLITZ Whoop 2.5W VTX
Frame: 327mm wheelbase
Motor: XING2 2809 1250KV motors
Prop: HQ 7.5X3.7X3 propellers
Weight: 705g(Without Battery)
Dimensions (L×W×H):270x199x34mm
Max Speed: 140km/h
Maximum Takeoff Altitude: 3200 m
Max Hover Time: Approx. 30 mins(with 6S 8000mAh Battery)
Max Flight Distance: 18 km
Operating Temperature Range: -10° to 40° C (14° to 104° F)
Transmission Power (EIRP): FCC: < 33 dBm / CE: < 14 dBm / SRRC: < 30 dBm Antennas: Single Antenna GNSS: GPS+SBAS+Galileo+QZSS+Glonass   Video Transmission (optional): Product Name: BLITZ Whoop 5.8G 1.6W VTX Output Power: 0-25-400-800-1600mw Input Volts: 12V Working Current: ≤pit @40mA,≤25mw@150mA,≤400mw@330mA,≤800mw@460mA,≤1600mw@660mA Transmission fre: 40CH(A-B-E-F-R) Antenna Interface: IPEX Mounting Hole: 25*25/φ1.6mm Weight: 16.5g (Antenna not included) Dimensions: 37mm*31.5mm*10mm Product Name: BLITZ Whoop 5.8G 2.5W VTX Output Power: 0-25-400-1000-2500mw Input Volts: 7-34V Working Current: ≤pit @12V 140mA, ≤25mw@12V 200mA, ≤400mw@12V 340mA, ≤1000mw@12V 480mA, ≤2500mw@12V 780mA Transmission fre: 40CH(A-B-E-F-R) Antenna Interface: MMCX Mounting Hole: 25*25/φ1.6mm Weight: 32g Dimensions: 50mm*30mm*16mm   Packing List: 1 x Chimera7 Pro V2 6S Analog BNF 1 x Battery pad 1 x Antenna 1 x Propellers(Pairs) 2 x Battery strap   Notice: All iFlight BNFs are tested before shipment to guarantee highest quality.  If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Characteristics Size 7.5 inch Geometry DeadCat Flight Stack BLITZ F7/E55 Motors 2809 1250KV Video Transmitter 5.8G 1.6W/2.5W (optional) Radio Transmitter PNP, ELRS, TBS (optional) GPS M10 chipset Max. Speed 140 km/h Weight ca. 705g (without battery) Description Smooth and Powerful XING2 Motors The latest upgrade of our bestseller XING motors, no compromises taken! Durable unibell (one-piece bell) technology, strong titanium alloy shaft with reinforced bell joint, crash resistant 7075 aluminum bell, smooth and long-lasting Japanese NSK bearings, center slotted N52H curved arc magnets, and our XING O-ring bushing gap protection. Latest Chimera7 Pro Frame for Maximum Protection The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts. Secured Battery Plug with Anti-Spark Filter Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage. GPS Pre-Installed for More Safety at A Distance GPS functionality to find your way back and Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behaviour; Setup instructions included). Custom iFlight 100mm LR antenna for best signal coverage even at long distances.   Specifications: Product Name: Chimera7 Pro V2 6S Analog FC: BLITZ F722 Flight Controller ESC: BLITZ E55 4-IN-1 2-6S 55A ESC Video Transmission: /BLITZ Whoop 1.6W VTX/ BLITZ Whoop 2.5W VTX Frame: 327mm wheelbase Motor: XING2 2809 1250KV motors Prop: HQ 7.5X3.7X3 propellers Weight: 705g(Without Battery) Dimensions (L×W×H):270x199x34mm Max Speed: 140km/h Maximum Takeoff Altitude: 3200 m Max Hover Time: Approx. 30 mins(with 6S 8000mAh Battery) Max Flight Distance: 18 km Operating Temperature Range: -10° to 40° C (14° to 104° F) Transmission Power (EIRP): FCC: < 33 dBm / CE: < 14 dBm / SRRC: < 30 dBm Antennas: Single Antenna GNSS: GPS+SBAS+Galileo+QZSS+Glonass   Video Transmission (optional): Product Name: BLITZ Whoop 5.8G 1.6W VTX Output Power: 0-25-400-800-1600mw Input Volts: 12V Working Current: ≤pit @40mA,≤25mw@150mA,≤400mw@330mA,≤800mw@460mA,≤1600mw@660mA Transmission fre: 40CH(A-B-E-F-R) Antenna Interface: IPEX Mounting Hole: 25*25/φ1.6mm Weight: 16.5g (Antenna not included) Dimensions: 37mm*31.5mm*10mm Product Name: BLITZ Whoop 5.8G 2.5W VTX Output Power: 0-25-400-1000-2500mw Input Volts: 7-34V Working Current: ≤pit @12V 140mA, ≤25mw@12V 200mA, ≤400mw@12V 340mA, ≤1000mw@12V 480mA, ≤2500mw@12V 780mA Transmission fre: 40CH(A-B-E-F-R) Antenna Interface: MMCX Mounting Hole: 25*25/φ1.6mm Weight: 32g Dimensions: 50mm*30mm*16mm   Packing List: 1 x Chimera7 Pro V2 6S Analog BNF 1 x Battery pad 1 x Antenna 1 x Propellers(Pairs) 2 x Battery strap   Notice: All iFlight BNFs are tested before shipment to guarantee highest quality.  If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Characteristics Size 7.5 inch Geometry DeadCat Flight Stack BLITZ F7/E55 Motors 2809 1250KV Video Transmitter 5.8G 1.6W/2.5W (optional) Radio Transmitter PNP, ELRS, TBS (optional) GPS M10 chipset Max. Speed 140 km/h Weight ca. 705g (without battery)

Все таможенные и транспортные процедуры мы осуществим и продукция будет доставлена ​​по вашему адресу в Российской Федерации.

Описание

Smooth and Powerful XING2 Motors

The latest upgrade of our bestseller XING motors, no compromises taken! Durable unibell (one-piece bell) technology, strong titanium alloy shaft with reinforced bell joint, crash resistant 7075 aluminum bell, smooth and long-lasting Japanese NSK bearings, center slotted N52H curved arc magnets, and our XING O-ring bushing gap protection.

Latest Chimera7 Pro Frame for Maximum Protection

The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts.

Secured Battery Plug with Anti-Spark Filter

Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage.

GPS Pre-Installed for More Safety at A Distance

GPS functionality to find your way back and Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behaviour; Setup instructions included). Custom iFlight 100mm LR antenna for best signal coverage even at long distances.

 

Specifications:

Product Name: Chimera7 Pro V2 6S Analog

FC: BLITZ F722 Flight Controller

ESC: BLITZ E55 4-IN-1 2-6S 55A ESC

Video Transmission: /BLITZ Whoop 1.6W VTX/ BLITZ Whoop 2.5W VTX

Frame: 327mm wheelbase

Motor: XING2 2809 1250KV motors

Prop: HQ 7.5X3.7X3 propellers

Weight: 705g(Without Battery)

Dimensions (L×W×H):270x199x34mm

Max Speed: 140km/h

Maximum Takeoff Altitude: 3200 m

Max Hover Time: Approx. 30 mins(with 6S 8000mAh Battery)

Max Flight Distance: 18 km

Operating Temperature Range: -10° to 40° C (14° to 104° F)

Transmission Power (EIRP): FCC: < 33 dBm / CE: < 14 dBm / SRRC: < 30 dBm

Antennas: Single Antenna

GNSS: GPS+SBAS+Galileo+QZSS+Glonass

 

Video Transmission (optional):

Product Name: BLITZ Whoop 5.8G 1.6W VTX

Output Power: 0-25-400-800-1600mw

Input Volts: 12V

Working Current: ≤pit @40mA,≤25mw@150mA,≤400mw@330mA,≤800mw@460mA,≤1600mw@660mA

Transmission fre: 40CH(A-B-E-F-R)

Antenna Interface: IPEX

Mounting Hole: 25*25/φ1.6mm

Weight: 16.5g (Antenna not included)

Dimensions: 37mm*31.5mm*10mm

Product Name: BLITZ Whoop 5.8G 2.5W VTX

Output Power: 0-25-400-1000-2500mw

Input Volts: 7-34V

Working Current: ≤pit @12V 140mA, ≤25mw@12V 200mA, ≤400mw@12V 340mA, ≤1000mw@12V 480mA, ≤2500mw@12V 780mA

Transmission fre: 40CH(A-B-E-F-R)

Antenna Interface: MMCX

Mounting Hole: 25*25/φ1.6mm

Weight: 32g

Dimensions: 50mm*30mm*16mm

 

Packing List:

1 x Chimera7 Pro V2 6S Analog BNF

1 x Battery pad

1 x Antenna

1 x Propellers(Pairs)

2 x Battery strap

 

Notice:

All iFlight BNFs are tested before shipment to guarantee highest quality. 

If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com.