BLITZ F7 V1.2 Flight Controller

SKU

  • Flash Sale

0
0
0
0
Days
0
0
Hrs
0
0
Min
0
0
Sec

About

Description

Our latest BLITZ Flight Controller used in our iFlight BNFs. Ultra fast F7 MCU for 2-6S batteries. 30,5×30,5 mounting pattern. The perfect match for your new frame. Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required), FC indicator LEDs for visual debugging, with LC filter.
 
Specifications:
MCU: STM32 F722
Gyro: ICM42688
Barometer: DPS310
OSD Chip: AT7456E
Flash: 32MB (Blackbox flash)
UARTS: 6
Motor outputs: 4x (SH1.0 connector)
I2C serial: SDA / SLA pads
Smartaudio / IRC Tramp VTX protocol supported
LED controller: Yes
Beeper pad: Yes
Firmware target: IFRC-IFLIGHT_BLITZ_F722
Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter
Dimensions: 36.5*35 mm
Weight: 7.8g
BEC: 5V 2.5A / 9V 2A
 
Wiring Suggestion:
UART 1 for VTX HD / Analog
UART 2 for a Receiver
UART 3/4/5 for GPS or other sensors that require a serial port
UART 6 for ESC Telemet
 
Packing List:
1 x BLITZ F7 V1.2 Flight Controller
1 x FC connectors (as above)
1 x silicon grommets

Description

Our latest BLITZ Flight Controller used in our iFlight BNFs. Ultra fast F7 MCU for 2-6S batteries. 30,5×30,5 mounting pattern. The perfect match for your new frame. Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required), FC indicator LEDs for visual debugging, with LC filter.
 
Specifications:
MCU: STM32 F722
Gyro: ICM42688
Barometer: DPS310
OSD Chip: AT7456E
Flash: 32MB (Blackbox flash)
UARTS: 6
Motor outputs: 4x (SH1.0 connector)
I2C serial: SDA / SLA pads
Smartaudio / IRC Tramp VTX protocol supported
LED controller: Yes
Beeper pad: Yes
Firmware target: IFRC-IFLIGHT_BLITZ_F722
Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter
Dimensions: 36.5*35 mm
Weight: 7.8g
BEC: 5V 2.5A / 9V 2A
 
Wiring Suggestion:
UART 1 for VTX HD / Analog
UART 2 for a Receiver
UART 3/4/5 for GPS or other sensors that require a serial port
UART 6 for ESC Telemet
 
Packing List:
1 x BLITZ F7 V1.2 Flight Controller
1 x FC connectors (as above)
1 x silicon grommets

Все таможенные и транспортные процедуры мы осуществим и продукция будет доставлена ​​по вашему адресу в Российской Федерации.

Описание

Electronics



by

iFlight-RC Europe


€60,90


€60,90

taxes included (B2B, non-EU-states, UK, CH not included)

Our latest BLITZ Flight Controller used in our iFlight BNFs. Ultra fast F7 MCU for 2-6S batteries. 30,5×30,5 mounting … 
Read more
Our latest BLITZ Flight Controller used in our iFlight BNFs. Ultra fast F7 MCU for 2-6S batteries. 30,5×30,5 mounting pattern. The perfect match for your new frame. Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required), FC indicator LEDs for visual debugging, with LC filter.
Read less

Our latest BLITZ Flight Controller used in our iFlight BNFs. Ultra fast F7 MCU for 2-6S batteries. 30,5×30,5 mounting pattern. The perfect match for your new frame. Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required), FC indicator LEDs for visual debugging, with LC filter.

Official iFlight-RC Europe Store

Products shipped from Austria

No Import Fees for EU Member States

Excluding GB, CH, NO, LI, etc.

Lightning-Fast Shipping

Express, Standard or Free

6 Month Free Repairs (excl. parts)

Вам также может понравиться