ProTek35 V1.4 O3 6S HD
SKU
About
Description
The Protek CineWhoop has a longer flight experience and weighs less than the previous cinewhoops! The new version of Protek35 has been released, we upgraded the frame to be compatible with DJI O3 air unit.
iFlight was able to increase the speed and thrust by 50% compared to its 3-inch predecessor which gives a lot more room for a lot more fun; as a result, the ProTek35 is equipped with the Butter Smooth 2205 2300KV Motors. It also features the DJI O3 air unit, BLITZ whoop F7 AIO, 55A 2-6S ESC, Nazgul 3535 propellers, and more!
Highlights
No Props or frame in view!
DJI O3 HD Air Unit Low-Latency digital transmission
Secured Battery Plug and CNC bracket — Easy to install battery straps
High-performance True-AIO Board BLITZ F7 AIO 55A to save weight and space
T700 Quality Carbon — 40% more tensile strength compared to common 3K carbon
Lightweight one-piece frame design — Less flexibility, more Rigid, more Durable
Low Resonance frame construction — Less Jello, more Cinematic footage
Specifications
Product Name: ProTek35 V1.4 O3 6S HD
AIO: BLITZ Whoop F7 AIO
Video Transmission: DJI O3 Air Unit
Frame: 151mm wheelbase
Motor: XING 2205 2300KV motors
Prop: Nazgul 3535 propellers
Weight: 363 g (Without Battery)
Dimensions (L×W×H): 217×194×32.5 mm
Max Speed: 140 km/h
Maximum Takeoff Altitude: 5000 m
Max Hover Time: Approx. 6 mins（With 1400 battery no load）
Max Wind Speed Resistance: Level 4
Operating Temperature Range: -10° to 40° C (14° to 104° F)
Antennas: Single Antenna
GNSS: N/A
Video Transmission
Product Name: DJI O3 Air Unit
Weight: Approx. 36.4 grams
Communication Bandwidth： Max 40 MHz
FOV (single screen): 155°
Communication Frequency：2.400-2.4835 GHz (RX only) / 5.725-5.850 GHz (RX and TX)
End-to-End Latency
With DJI FPV Goggles V2:
810p/120fps Video Transmission Quality: The latency is lower than 28 ms.
810p/60fps Video Transmission Quality: The latency is lower than 40 ms.
With DJI Goggles 2:
1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.
1080p/60fps Video Transmission Quality: The latency is as low as 40 ms.
Max Video Transmission Bitrate: 50 Mbps
Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC)
Operating Temperature Range: -10º to 40º C (14° to 104° F)
Power Input: 7.4-26.4 V
Audio Transmission: N/A
Packing List
1 x ProTek35 V1.4 O3 6S HD BNF
1 x 3.5 inch prop (2 pairs)
2 x Battery pad
1 x Battery strap
Pre-tuned and Setup for you
Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
To restore lost tunes or updates, please check our linked article on «Firmware/Factory Dumps»
Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!
Please check our linked article on «How to disable Angle-Mode, activate Acro-Mode»
Notice
All iFlight BNFs are tested before shipment to guarantee highest quality.
If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com.
Characteristics
Size
3.5 inch
Geometry
Ducted Whoop
Flight Stack
BLITZ Whoop F7 AIO
Motors
2205 2300KV
Video Transmitter
DJI O3 Air Unit
Radio Transmitter
DJI FPV RC2, ELRS, TBS (optional)
Max. Speed
140 km/h
Weight
ca. 363g (without battery)
Description
The Protek CineWhoop has a longer flight experience and weighs less than the previous cinewhoops! The new version of Protek35 has been released, we upgraded the frame to be compatible with DJI O3 air unit.
iFlight was able to increase the speed and thrust by 50% compared to its 3-inch predecessor which gives a lot more room for a lot more fun; as a result, the ProTek35 is equipped with the Butter Smooth 2205 2300KV Motors. It also features the DJI O3 air unit, BLITZ whoop F7 AIO, 55A 2-6S ESC, Nazgul 3535 propellers, and more!
Highlights
No Props or frame in view!
DJI O3 HD Air Unit Low-Latency digital transmission
Secured Battery Plug and CNC bracket — Easy to install battery straps
High-performance True-AIO Board BLITZ F7 AIO 55A to save weight and space
T700 Quality Carbon — 40% more tensile strength compared to common 3K carbon
Lightweight one-piece frame design — Less flexibility, more Rigid, more Durable
Low Resonance frame construction — Less Jello, more Cinematic footage
Specifications
Product Name: ProTek35 V1.4 O3 6S HD
AIO: BLITZ Whoop F7 AIO
Video Transmission: DJI O3 Air Unit
Frame: 151mm wheelbase
Motor: XING 2205 2300KV motors
Prop: Nazgul 3535 propellers
Weight: 363 g (Without Battery)
Dimensions (L×W×H): 217×194×32.5 mm
Max Speed: 140 km/h
Maximum Takeoff Altitude: 5000 m
Max Hover Time: Approx. 6 mins（With 1400 battery no load）
Max Wind Speed Resistance: Level 4
Operating Temperature Range: -10° to 40° C (14° to 104° F)
Antennas: Single Antenna
GNSS: N/A
Video Transmission
Product Name: DJI O3 Air Unit
Weight: Approx. 36.4 grams
Communication Bandwidth： Max 40 MHz
FOV (single screen): 155°
Communication Frequency：2.400-2.4835 GHz (RX only) / 5.725-5.850 GHz (RX and TX)
End-to-End Latency
With DJI FPV Goggles V2:
810p/120fps Video Transmission Quality: The latency is lower than 28 ms.
810p/60fps Video Transmission Quality: The latency is lower than 40 ms.
With DJI Goggles 2:
1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.
1080p/60fps Video Transmission Quality: The latency is as low as 40 ms.
Max Video Transmission Bitrate: 50 Mbps
Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC)
Operating Temperature Range: -10º to 40º C (14° to 104° F)
Power Input: 7.4-26.4 V
Audio Transmission: N/A
Packing List
1 x ProTek35 V1.4 O3 6S HD BNF
1 x 3.5 inch prop (2 pairs)
2 x Battery pad
1 x Battery strap
Pre-tuned and Setup for you
Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
To restore lost tunes or updates, please check our linked article on «Firmware/Factory Dumps»
Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!
Please check our linked article on «How to disable Angle-Mode, activate Acro-Mode»
Notice
All iFlight BNFs are tested before shipment to guarantee highest quality.
If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com.
Characteristics
Size
3.5 inch
Geometry
Ducted Whoop
Flight Stack
BLITZ Whoop F7 AIO
Motors
2205 2300KV
Video Transmitter
DJI O3 Air Unit
Radio Transmitter
DJI FPV RC2, ELRS, TBS (optional)
Max. Speed
140 km/h
Weight
ca. 363g (without battery)
Описание
The Protek CineWhoop has a longer flight experience and weighs less than the previous cinewhoops! The new version of Protek35 has been released, we upgraded the frame to be compatible with DJI O3 air unit.
iFlight was able to increase the speed and thrust by 50% compared to its 3-inch predecessor which gives a lot more room for a lot more fun; as a result, the ProTek35 is equipped with the Butter Smooth 2205 2300KV Motors. It also features the DJI O3 air unit, BLITZ whoop F7 AIO, 55A 2-6S ESC, Nazgul 3535 propellers, and more!
Highlights
No Props or frame in view!
DJI O3 HD Air Unit Low-Latency digital transmission
Secured Battery Plug and CNC bracket — Easy to install battery straps
High-performance True-AIO Board BLITZ F7 AIO 55A to save weight and space
T700 Quality Carbon — 40% more tensile strength compared to common 3K carbon
Lightweight one-piece frame design — Less flexibility, more Rigid, more Durable
Low Resonance frame construction — Less Jello, more Cinematic footage
Specifications
Product Name: ProTek35 V1.4 O3 6S HD
AIO: BLITZ Whoop F7 AIO
Video Transmission: DJI O3 Air Unit
Frame: 151mm wheelbase
Motor: XING 2205 2300KV motors
Prop: Nazgul 3535 propellers
Weight: 363 g (Without Battery)
Dimensions (L×W×H): 217×194×32.5 mm
Max Speed: 140 km/h
Maximum Takeoff Altitude: 5000 m
Max Hover Time: Approx. 6 mins（With 1400 battery no load）
Max Wind Speed Resistance: Level 4
Operating Temperature Range: -10° to 40° C (14° to 104° F)
Antennas: Single Antenna
GNSS: N/A
Video Transmission
Product Name: DJI O3 Air Unit
Weight: Approx. 36.4 grams
Communication Bandwidth： Max 40 MHz
FOV (single screen): 155°
Communication Frequency：2.400-2.4835 GHz (RX only) / 5.725-5.850 GHz (RX and TX)
End-to-End Latency
With DJI FPV Goggles V2:
810p/120fps Video Transmission Quality: The latency is lower than 28 ms.
810p/60fps Video Transmission Quality: The latency is lower than 40 ms.
With DJI Goggles 2:
1080p/100fps Video Transmission Quality: The latency is as low as 30 ms.
1080p/60fps Video Transmission Quality: The latency is as low as 40 ms.
Max Video Transmission Bitrate: 50 Mbps
Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC)
Operating Temperature Range: -10º to 40º C (14° to 104° F)
Power Input: 7.4-26.4 V
Audio Transmission: N/A
Packing List
1 x ProTek35 V1.4 O3 6S HD BNF
1 x 3.5 inch prop (2 pairs)
2 x Battery pad
1 x Battery strap
Pre-tuned and Setup for you
Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!
To restore lost tunes or updates, please check our linked article on «Firmware/Factory Dumps»
Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!
Please check our linked article on «How to disable Angle-Mode, activate Acro-Mode»
Notice
All iFlight BNFs are tested before shipment to guarantee highest quality.
If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com.
