About Description   Palm Size Micro FPV drone The palm-sized, compact Defender 16 is just as portable as it can be. The whole frame is injection molded for durability and lightweight, the Defender 16 is by far our smallest and lightest 4K whoop drone with 128g takeoff weight. It's not only regulation-friendly, but also the safest in its series, allowing you to fly anywhere and whenever. Customized O3 Lite Air Unit Equipped with the DJI O3 Air Unit HD transmission system, the Defender 16/20 supports 4K/120fps video and shoots up to 155° distance super-wide FOV footage for stunning visuals. One-button Functional Power Switch Better operation through one physical button, not only just power on and off but also inbuilt programmable RGB light colors and modes to visually display the battery power. We’ve added a protective circuit to extend the lifespan of the battery connector and prevent rapid voltage or current spikes which can protect your electronics from damage. Innovative Quick-Release Battery with Type-C fast charger The Defender 16 comes with a stock 2S 900mAh providing up to 6min flight time. Crash protected battery shell and innovative quick-release structure for easy replacement. Upgraded plug and play Type-C charger for user-friendly fast charging, get 80% charge in just 18 minutes. The battery has an inbuilt auto-discharge module, it will discharge itself when not in use, making it safe and worry-free. Easy to use for beginners and professionals No fear of dust, take off boldly. By using dustproof port plugs to isolate the interface from the outside, ensure function properly. Extend the life of the interface. Easy to repair. The drone can be disassembled with only 6 screws, making it much more convenient for maintenance and repair. Plug and play high performance AIO, 30% increase in redundancy to cope with extreme operations. Integrated beeper for quick retrieval of accidental loss. All ports and buttons are easy to access from the outside. Countless easy-to-use features let you get started right away.  1) No soldering is required for the whole drone, motors, and propellers adopting the plug-in mounting method.  2) A dedicated VTX mount bracket with a central grille opening, together with the air duct design in the drone, can dissipate heat when flying. 3) USER1 preset as video transmitter power supply switch, used to manually turn off the VTX when idle to safe power and prevent overheating.  4) Customized vibration damped O3 camera mount to keep your raw footage as smooth as possible, as well as ensure good Gyro Data for the in-built or in-post camera stabilization, jello free.   Specifications: Product Name: Defender 16 O3 2S HD Flight Electronics: Defender 16/20 F411 AIO Video Transmission: DJI O3 Air Unit (naked version) Frame wheelbase: 81mm Motor: Defender16 1103 14000KV motors Prop: Defender 16 1809-3 Propellers Takeoff Weight incl. 900mAh battery: 128g Dimensions (L×W×H)：121x117x47mm Max Speed: 55Km/H (Manual Mode) Maximum Takeoff Altitude: 2000 m Max Hover Time: Approx. 6 mins(with 2S 900mAh battery) Max Wind Speed Resistance: Level 3 Operating Temperature Range: -10° to 40° C (14° to 104° F) Antennas: Dual Antennas GNSS: N/A   Video Transmission: Product Name: Naked DJI O3 Air Unit Communication Bandwidth： Max 40 MHz FOV (single screen): 155° Communication Frequency: 2.400-2.4835 GHz (RX only)；5.725-5.850 GHz(RX and TX) End-to-End Latency With DJI FPV Goggles V2: 810p/120fps Video Transmission Quality: The latency is lower than 28 ms. 810p/60fps Video Transmission Quality: The latency is lower than 40 ms. With DJI Goggles 2: 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms. 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms. Max Video Transmission Bitrate: 50 Mbps Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC) Operating Temperature Range: -10º to 40º C (14° to 104° F) Power Input: 7.4-26.4 V  Audio Transmission: N/A   Packing List: 1 x Defender 16 O3 HD BNF 1 x Defender 16 900mAh 25C 2S Battery 1 x Defender 16 Type-C Charging Adapter 4 x GEMFAN 45mm Props(Pairs) 4 x Defender 16 Props (pairs) 1 x Propeller Removal Tool 1 x Defender 16 Carrying Case   Notice: All iFlight BNFs are tested before shipment to guarantee highest quality.  If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Characteristics Size 1.8 inch Geometry Ducted Flight Stack Defender 16/20 F411 AIO Motors 1103 14000KV Video Transmitter DJI O3 Air Unit Radio Transmitter DJI FPV RC2, ELRS, TBS (optional) GPS Module No Max. Speed 55 km/h Take Of Mass incl. 900mAh battery: 128g Description   Palm Size Micro FPV drone The palm-sized, compact Defender 16 is just as portable as it can be. The whole frame is injection molded for durability and lightweight, the Defender 16 is by far our smallest and lightest 4K whoop drone with 128g takeoff weight. It's not only regulation-friendly, but also the safest in its series, allowing you to fly anywhere and whenever. Customized O3 Lite Air Unit Equipped with the DJI O3 Air Unit HD transmission system, the Defender 16/20 supports 4K/120fps video and shoots up to 155° distance super-wide FOV footage for stunning visuals. One-button Functional Power Switch Better operation through one physical button, not only just power on and off but also inbuilt programmable RGB light colors and modes to visually display the battery power. We’ve added a protective circuit to extend the lifespan of the battery connector and prevent rapid voltage or current spikes which can protect your electronics from damage. Innovative Quick-Release Battery with Type-C fast charger The Defender 16 comes with a stock 2S 900mAh providing up to 6min flight time. Crash protected battery shell and innovative quick-release structure for easy replacement. Upgraded plug and play Type-C charger for user-friendly fast charging, get 80% charge in just 18 minutes. The battery has an inbuilt auto-discharge module, it will discharge itself when not in use, making it safe and worry-free. Easy to use for beginners and professionals No fear of dust, take off boldly. By using dustproof port plugs to isolate the interface from the outside, ensure function properly. Extend the life of the interface. Easy to repair. The drone can be disassembled with only 6 screws, making it much more convenient for maintenance and repair. Plug and play high performance AIO, 30% increase in redundancy to cope with extreme operations. Integrated beeper for quick retrieval of accidental loss. All ports and buttons are easy to access from the outside. Countless easy-to-use features let you get started right away.  1) No soldering is required for the whole drone, motors, and propellers adopting the plug-in mounting method.  2) A dedicated VTX mount bracket with a central grille opening, together with the air duct design in the drone, can dissipate heat when flying. 3) USER1 preset as video transmitter power supply switch, used to manually turn off the VTX when idle to safe power and prevent overheating.  4) Customized vibration damped O3 camera mount to keep your raw footage as smooth as possible, as well as ensure good Gyro Data for the in-built or in-post camera stabilization, jello free.   Specifications: Product Name: Defender 16 O3 2S HD Flight Electronics: Defender 16/20 F411 AIO Video Transmission: DJI O3 Air Unit (naked version) Frame wheelbase: 81mm Motor: Defender16 1103 14000KV motors Prop: Defender 16 1809-3 Propellers Takeoff Weight incl. 900mAh battery: 128g Dimensions (L×W×H)：121x117x47mm Max Speed: 55Km/H (Manual Mode) Maximum Takeoff Altitude: 2000 m Max Hover Time: Approx. 6 mins(with 2S 900mAh battery) Max Wind Speed Resistance: Level 3 Operating Temperature Range: -10° to 40° C (14° to 104° F) Antennas: Dual Antennas GNSS: N/A   Video Transmission: Product Name: Naked DJI O3 Air Unit Communication Bandwidth： Max 40 MHz FOV (single screen): 155° Communication Frequency: 2.400-2.4835 GHz (RX only)；5.725-5.850 GHz(RX and TX) End-to-End Latency With DJI FPV Goggles V2: 810p/120fps Video Transmission Quality: The latency is lower than 28 ms. 810p/60fps Video Transmission Quality: The latency is lower than 40 ms. With DJI Goggles 2: 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms. 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms. Max Video Transmission Bitrate: 50 Mbps Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC) Operating Temperature Range: -10º to 40º C (14° to 104° F) Power Input: 7.4-26.4 V  Audio Transmission: N/A   Packing List: 1 x Defender 16 O3 HD BNF 1 x Defender 16 900mAh 25C 2S Battery 1 x Defender 16 Type-C Charging Adapter 4 x GEMFAN 45mm Props(Pairs) 4 x Defender 16 Props (pairs) 1 x Propeller Removal Tool 1 x Defender 16 Carrying Case   Notice: All iFlight BNFs are tested before shipment to guarantee highest quality.  If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Characteristics Size 1.8 inch Geometry Ducted Flight Stack Defender 16/20 F411 AIO Motors 1103 14000KV Video Transmitter DJI O3 Air Unit Radio Transmitter DJI FPV RC2, ELRS, TBS (optional) GPS Module No Max. Speed 55 km/h Take Of Mass incl. 900mAh battery: 128g

About Description This V2 Sponge Foam Padding for DJI Goggles 2 ergonomically fits your face to reduce light leakage and provide a comfortable wearing experience. Description This V2 Sponge Foam Padding for DJI Goggles 2 ergonomically fits your face to reduce light leakage and provide a comfortable wearing experience.

About Description Smooth and Powerful XING2 Motors The latest upgrade of our bestseller XING motors, no compromises taken! Durable unibell (one-piece bell) technology, strong titanium alloy shaft with reinforced bell joint, crash resistant 7075 aluminum bell, smooth and long-lasting Japanese NSK bearings, center slotted N52H curved arc magnets and our XING O-ring bushing gap protection. Latest Nazgul Frame for Maximum Protection The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts. DJI O3 HD Air Unit Low-Latency digital transmission Up to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. (Source DJI) 4K Stabilized Video with 155° Ultra-Wide Angle Together with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI) Secured Battery Plug with Anti-Spark Filter Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage. Specially Designed Heatsink for DJI O3 HD Air Unit Improved cooling performance for the high power draw of the DJI O3 video transmitter. We’ve added a custom CNC heatsink for excellent heat dissipation without overheating, even on high power levels.     Specifications: Product Name: Evoque F5 V2 FC: BLITZ Mini F722 Flight Controller ESC: BLITZ Mini E55 4-IN-1 2-6S 55A ESC Video Transmission: DJI O3 Air Unit Frame wheelbase: 225mm (Squashed X) / 223 mm (DeadCat) Motor: XING2 2207 motors Prop: Nazgul 5 inch propellers Weight: 433g/436g Takeoff Weight: Approx. 693 g/695g (With 1400mAh Battery) Dimensions (L×W×H): 172×145×36±2mm (Squashed X) / 190×136×36±2mm (DeadCat) Diagonal Distance: 225 mm Max Speed: 190 Km/h (Manual Mode) Maximum Takeoff Altitude: 5000 m Max Hover Time: Approx. 8 mins Max Flight Distance: 5 km Max Wind Speed Resistance: Level 7 Operating Temperature Range: -10° to 40° C (14° to 104° F) Antennas: Dual Antennas GNSS： GPS+SBAS+Galileo+QZSS+Glonass (Optional)   Video Transmission: Product Name: DJI O3 Air Unit Weight: Approx. 36.4 grams（headband included） Communication Bandwidth： Max 40 MHz FOV (single screen): 155° Communication Frequency：2.400-2.4835 GHz (RX only)  /  5.725-5.850 GHz (RX and TX) End-to-End Latency With DJI FPV Goggles V2: 810p/120fps Video Transmission Quality: The latency is lower than 28 ms. 810p/60fps Video Transmission Quality: The latency is lower than 40 ms. With DJI Goggles 2: 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms. 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms. Max Video Transmission Bitrate: 50 Mbps Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC) Operating Temperature Range: -10º to 40º C (14° to 104° F) Power Input: 7.4-26.4 V  Audio Transmission: N/A   Packing List: 1 x Evoque F5 6S HD BNF 2 x Antennas 1 x Battery pad 2 x propeller(Pairs) 2 x Battery strap   Notice: All iFlight BNFs are tested before shipment to guarantee highest quality.  If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Characteristics Size 5 inch Geometry Squashed X or DeadCat Flight Stack BLITZ Mini F7/E55 Motors 2207 1750KV Video Transmitter DJI O3 Air Unit Radio Transmitter DJI FPV RC2, ELRS, TBS (optional) GPS Module M10 chipset Max. Speed 190 km/h Weight ca. 433 (without battery) Description Smooth and Powerful XING2 Motors The latest upgrade of our bestseller XING motors, no compromises taken! Durable unibell (one-piece bell) technology, strong titanium alloy shaft with reinforced bell joint, crash resistant 7075 aluminum bell, smooth and long-lasting Japanese NSK bearings, center slotted N52H curved arc magnets and our XING O-ring bushing gap protection. Latest Nazgul Frame for Maximum Protection The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts. DJI O3 HD Air Unit Low-Latency digital transmission Up to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. (Source DJI) 4K Stabilized Video with 155° Ultra-Wide Angle Together with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI) Secured Battery Plug with Anti-Spark Filter Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage. Specially Designed Heatsink for DJI O3 HD Air Unit Improved cooling performance for the high power draw of the DJI O3 video transmitter. We’ve added a custom CNC heatsink for excellent heat dissipation without overheating, even on high power levels.     Specifications: Product Name: Evoque F5 V2 FC: BLITZ Mini F722 Flight Controller ESC: BLITZ Mini E55 4-IN-1 2-6S 55A ESC Video Transmission: DJI O3 Air Unit Frame wheelbase: 225mm (Squashed X) / 223 mm (DeadCat) Motor: XING2 2207 motors Prop: Nazgul 5 inch propellers Weight: 433g/436g Takeoff Weight: Approx. 693 g/695g (With 1400mAh Battery) Dimensions (L×W×H): 172×145×36±2mm (Squashed X) / 190×136×36±2mm (DeadCat) Diagonal Distance: 225 mm Max Speed: 190 Km/h (Manual Mode) Maximum Takeoff Altitude: 5000 m Max Hover Time: Approx. 8 mins Max Flight Distance: 5 km Max Wind Speed Resistance: Level 7 Operating Temperature Range: -10° to 40° C (14° to 104° F) Antennas: Dual Antennas GNSS： GPS+SBAS+Galileo+QZSS+Glonass (Optional)   Video Transmission: Product Name: DJI O3 Air Unit Weight: Approx. 36.4 grams（headband included） Communication Bandwidth： Max 40 MHz FOV (single screen): 155° Communication Frequency：2.400-2.4835 GHz (RX only)  /  5.725-5.850 GHz (RX and TX) End-to-End Latency With DJI FPV Goggles V2: 810p/120fps Video Transmission Quality: The latency is lower than 28 ms. 810p/60fps Video Transmission Quality: The latency is lower than 40 ms. With DJI Goggles 2: 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms. 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms. Max Video Transmission Bitrate: 50 Mbps Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC) Operating Temperature Range: -10º to 40º C (14° to 104° F) Power Input: 7.4-26.4 V  Audio Transmission: N/A   Packing List: 1 x Evoque F5 6S HD BNF 2 x Antennas 1 x Battery pad 2 x propeller(Pairs) 2 x Battery strap   Notice: All iFlight BNFs are tested before shipment to guarantee highest quality.  If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Characteristics Size 5 inch Geometry Squashed X or DeadCat Flight Stack BLITZ Mini F7/E55 Motors 2207 1750KV Video Transmitter DJI O3 Air Unit Radio Transmitter DJI FPV RC2, ELRS, TBS (optional) GPS Module M10 chipset Max. Speed 190 km/h Weight ca. 433 (without battery)

About Description Need some new TPU parts for your iFlight BNF? Protective hard rubber to prevent damage to your frame and a good reduction in impact force on hard crashes. Never fly without it. All printed with high quality TPU available in various colors. Compatible with:Chimera7 Pro V2 Description Need some new TPU parts for your iFlight BNF? Protective hard rubber to prevent damage to your frame and a good reduction in impact force on hard crashes. Never fly without it. All printed with high quality TPU available in various colors. Compatible with:Chimera7 Pro V2