About Description For Nazgul Evoque series compatible with F4D or F4X.   Description For Nazgul Evoque series compatible with F4D or F4X.  

About Description Need some new TPU parts for your iFlight BNF? Protective hard rubber to prevent damage to your frame and a good reduction in impact force on hard crashes. Never fly without it. All printed with high quality TPU available in various colors. Compatible with:Nazgul Evoque F4 (F4X and F4D) Description Need some new TPU parts for your iFlight BNF? Protective hard rubber to prevent damage to your frame and a good reduction in impact force on hard crashes. Never fly without it. All printed with high quality TPU available in various colors. Compatible with:Nazgul Evoque F4 (F4X and F4D)

About Description Smooth and Powerful XING2 Motors The latest upgrade of our bestseller XING motors, no compromises taken! Durable unibell (one-piece bell) technology, strong titanium alloy shaft with reinforced bell joint, crash resistant 7075 aluminum bell, smooth and long-lasting Japanese NSK bearings, center slotted N52H curved arc magnets and our XING O-ring bushing gap protection. Latest Nazgul Frame for Maximum Protection The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts. DJI O3 HD Air Unit Low-Latency digital transmission Up to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. (Source DJI) 4K Stabilized Video with 155° Ultra-Wide Angle Together with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI) Secured Battery Plug with Anti-Spark Filter Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage. Specially Designed Heatsink for DJI O3 HD Air Unit Improved cooling performance for the high power draw of the DJI O3 video transmitter. We’ve added a custom CNC heatsink for excellent heat dissipation without overheating, even on high power levels.     Specifications: Product Name: Evoque F5 V2 FC: BLITZ Mini F722 Flight Controller ESC: BLITZ Mini E55 4-IN-1 2-6S 55A ESC Video Transmission: DJI O3 Air Unit Frame wheelbase: 225mm (Squashed X) / 223 mm (DeadCat) Motor: XING2 2207 motors Prop: Nazgul 5 inch propellers Weight: 433g/436g Takeoff Weight: Approx. 693 g/695g (With 1400mAh Battery) Dimensions (L×W×H): 172×145×36±2mm (Squashed X) / 190×136×36±2mm (DeadCat) Diagonal Distance: 225 mm Max Speed: 190 Km/h (Manual Mode) Maximum Takeoff Altitude: 5000 m Max Hover Time: Approx. 8 mins Max Flight Distance: 5 km Max Wind Speed Resistance: Level 7 Operating Temperature Range: -10° to 40° C (14° to 104° F) Antennas: Dual Antennas GNSS： GPS+SBAS+Galileo+QZSS+Glonass (Optional)   Video Transmission: Product Name: DJI O3 Air Unit Weight: Approx. 36.4 grams（headband included） Communication Bandwidth： Max 40 MHz FOV (single screen): 155° Communication Frequency：2.400-2.4835 GHz (RX only)  /  5.725-5.850 GHz (RX and TX) End-to-End Latency With DJI FPV Goggles V2: 810p/120fps Video Transmission Quality: The latency is lower than 28 ms. 810p/60fps Video Transmission Quality: The latency is lower than 40 ms. With DJI Goggles 2: 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms. 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms. Max Video Transmission Bitrate: 50 Mbps Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC) Operating Temperature Range: -10º to 40º C (14° to 104° F) Power Input: 7.4-26.4 V  Audio Transmission: N/A   Packing List: 1 x Evoque F5 6S HD BNF 2 x Antennas 1 x Battery pad 2 x propeller(Pairs) 2 x Battery strap   Notice: All iFlight BNFs are tested before shipment to guarantee highest quality.  If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Characteristics Size 5 inch Geometry Squashed X or DeadCat Flight Stack BLITZ Mini F7/E55 Motors 2207 1750KV Video Transmitter DJI O3 Air Unit Radio Transmitter DJI FPV RC2, ELRS, TBS (optional) GPS Module M10 chipset Max. Speed 190 km/h Weight ca. 433 (without battery) Description Smooth and Powerful XING2 Motors The latest upgrade of our bestseller XING motors, no compromises taken! Durable unibell (one-piece bell) technology, strong titanium alloy shaft with reinforced bell joint, crash resistant 7075 aluminum bell, smooth and long-lasting Japanese NSK bearings, center slotted N52H curved arc magnets and our XING O-ring bushing gap protection. Latest Nazgul Frame for Maximum Protection The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts. DJI O3 HD Air Unit Low-Latency digital transmission Up to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. (Source DJI) 4K Stabilized Video with 155° Ultra-Wide Angle Together with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI) Secured Battery Plug with Anti-Spark Filter Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage. Specially Designed Heatsink for DJI O3 HD Air Unit Improved cooling performance for the high power draw of the DJI O3 video transmitter. We’ve added a custom CNC heatsink for excellent heat dissipation without overheating, even on high power levels.     Specifications: Product Name: Evoque F5 V2 FC: BLITZ Mini F722 Flight Controller ESC: BLITZ Mini E55 4-IN-1 2-6S 55A ESC Video Transmission: DJI O3 Air Unit Frame wheelbase: 225mm (Squashed X) / 223 mm (DeadCat) Motor: XING2 2207 motors Prop: Nazgul 5 inch propellers Weight: 433g/436g Takeoff Weight: Approx. 693 g/695g (With 1400mAh Battery) Dimensions (L×W×H): 172×145×36±2mm (Squashed X) / 190×136×36±2mm (DeadCat) Diagonal Distance: 225 mm Max Speed: 190 Km/h (Manual Mode) Maximum Takeoff Altitude: 5000 m Max Hover Time: Approx. 8 mins Max Flight Distance: 5 km Max Wind Speed Resistance: Level 7 Operating Temperature Range: -10° to 40° C (14° to 104° F) Antennas: Dual Antennas GNSS： GPS+SBAS+Galileo+QZSS+Glonass (Optional)   Video Transmission: Product Name: DJI O3 Air Unit Weight: Approx. 36.4 grams（headband included） Communication Bandwidth： Max 40 MHz FOV (single screen): 155° Communication Frequency：2.400-2.4835 GHz (RX only)  /  5.725-5.850 GHz (RX and TX) End-to-End Latency With DJI FPV Goggles V2: 810p/120fps Video Transmission Quality: The latency is lower than 28 ms. 810p/60fps Video Transmission Quality: The latency is lower than 40 ms. With DJI Goggles 2: 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms. 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms. Max Video Transmission Bitrate: 50 Mbps Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC) Operating Temperature Range: -10º to 40º C (14° to 104° F) Power Input: 7.4-26.4 V  Audio Transmission: N/A   Packing List: 1 x Evoque F5 6S HD BNF 2 x Antennas 1 x Battery pad 2 x propeller(Pairs) 2 x Battery strap   Notice: All iFlight BNFs are tested before shipment to guarantee highest quality.  If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Characteristics Size 5 inch Geometry Squashed X or DeadCat Flight Stack BLITZ Mini F7/E55 Motors 2207 1750KV Video Transmitter DJI O3 Air Unit Radio Transmitter DJI FPV RC2, ELRS, TBS (optional) GPS Module M10 chipset Max. Speed 190 km/h Weight ca. 433 (without battery)

Über Beschreibung Smooth and Powerful XING2 Motors The latest upgrade of our bestseller XING motors, no compromises taken! Durable unibell (one-piece bell) technology, strong titanium alloy shaft with reinforced bell joint, crash resistant 7075 aluminum bell, smooth and long-lasting Japanese NSK bearings, center slotted N52H curved arc magnets and our XING O-ring bushing gap protection. Latest Nazgul Frame for Maximum Protection The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts. DJI O3 HD Air Unit Low-Latency digital transmission Up to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. (Source DJI) 4K Stabilized Video with 155° Ultra-Wide Angle Together with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI) Secured Battery Plug with Anti-Spark Filter Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage. Specially Designed Heatsink for DJI O3 HD Air Unit Improved cooling performance for the high power draw of the DJI O3 video transmitter. We’ve added a custom CNC heatsink for excellent heat dissipation without overheating, even on high power levels.     Specifications: Product Name: Evoque F5 V2 FC: BLITZ Mini F722 Flight Controller ESC: BLITZ Mini E55 4-IN-1 2-6S 55A ESC Video Transmission: DJI O3 Air Unit Frame wheelbase: 225mm (Squashed X) / 223 mm (DeadCat) Motor: XING2 2207 motors Prop: Nazgul 5 inch propellers Weight: 433g/436g Takeoff Weight: Approx. 693 g/695g (With 1400mAh Battery) Dimensions (L×W×H): 172×145×36±2mm (Squashed X) / 190×136×36±2mm (DeadCat) Diagonal Distance: 225 mm Max Speed: 190 Km/h (Manual Mode) Maximum Takeoff Altitude: 5000 m Max Hover Time: Approx. 8 mins Max Flight Distance: 5 km Max Wind Speed Resistance: Level 7 Operating Temperature Range: -10° to 40° C (14° to 104° F) Antennas: Dual Antennas GNSS： GPS+SBAS+Galileo+QZSS+Glonass (Optional)   Video Transmission: Product Name: DJI O3 Air Unit Weight: Approx. 36.4 grams（headband included） Communication Bandwidth： Max 40 MHz FOV (single screen): 155° Communication Frequency：2.400-2.4835 GHz (RX only)  /  5.725-5.850 GHz (RX and TX) End-to-End Latency With DJI FPV Goggles V2: 810p/120fps Video Transmission Quality: The latency is lower than 28 ms. 810p/60fps Video Transmission Quality: The latency is lower than 40 ms. With DJI Goggles 2: 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms. 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms. Max Video Transmission Bitrate: 50 Mbps Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC) Operating Temperature Range: -10º to 40º C (14° to 104° F) Power Input: 7.4-26.4 V  Audio Transmission: N/A   Packing List: 1 x Evoque F5 6S HD BNF 2 x Antennas 1 x Battery pad 2 x propeller(Pairs) 2 x Battery strap   Notice: All iFlight BNFs are tested before shipment to guarantee highest quality.  If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Eigenschaften Size 5 inch Geometry Squashed X or DeadCat Flight Stack BLITZ Mini F7/E55 Motors 2207 1750KV Video Transmitter DJI O3 Air Unit Radio Transmitter DJI FPV RC2, ELRS, TBS (optional) GPS Module M10 chipset Max. Speed 190 km/h Weight ca. 433 (without battery) Beschreibung Smooth and Powerful XING2 Motors The latest upgrade of our bestseller XING motors, no compromises taken! Durable unibell (one-piece bell) technology, strong titanium alloy shaft with reinforced bell joint, crash resistant 7075 aluminum bell, smooth and long-lasting Japanese NSK bearings, center slotted N52H curved arc magnets and our XING O-ring bushing gap protection. Latest Nazgul Frame for Maximum Protection The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts. DJI O3 HD Air Unit Low-Latency digital transmission Up to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. (Source DJI) 4K Stabilized Video with 155° Ultra-Wide Angle Together with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI) Secured Battery Plug with Anti-Spark Filter Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage. Specially Designed Heatsink for DJI O3 HD Air Unit Improved cooling performance for the high power draw of the DJI O3 video transmitter. We’ve added a custom CNC heatsink for excellent heat dissipation without overheating, even on high power levels.     Specifications: Product Name: Evoque F5 V2 FC: BLITZ Mini F722 Flight Controller ESC: BLITZ Mini E55 4-IN-1 2-6S 55A ESC Video Transmission: DJI O3 Air Unit Frame wheelbase: 225mm (Squashed X) / 223 mm (DeadCat) Motor: XING2 2207 motors Prop: Nazgul 5 inch propellers Weight: 433g/436g Takeoff Weight: Approx. 693 g/695g (With 1400mAh Battery) Dimensions (L×W×H): 172×145×36±2mm (Squashed X) / 190×136×36±2mm (DeadCat) Diagonal Distance: 225 mm Max Speed: 190 Km/h (Manual Mode) Maximum Takeoff Altitude: 5000 m Max Hover Time: Approx. 8 mins Max Flight Distance: 5 km Max Wind Speed Resistance: Level 7 Operating Temperature Range: -10° to 40° C (14° to 104° F) Antennas: Dual Antennas GNSS： GPS+SBAS+Galileo+QZSS+Glonass (Optional)   Video Transmission: Product Name: DJI O3 Air Unit Weight: Approx. 36.4 grams（headband included） Communication Bandwidth： Max 40 MHz FOV (single screen): 155° Communication Frequency：2.400-2.4835 GHz (RX only)  /  5.725-5.850 GHz (RX and TX) End-to-End Latency With DJI FPV Goggles V2: 810p/120fps Video Transmission Quality: The latency is lower than 28 ms. 810p/60fps Video Transmission Quality: The latency is lower than 40 ms. With DJI Goggles 2: 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms. 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms. Max Video Transmission Bitrate: 50 Mbps Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC) Operating Temperature Range: -10º to 40º C (14° to 104° F) Power Input: 7.4-26.4 V  Audio Transmission: N/A   Packing List: 1 x Evoque F5 6S HD BNF 2 x Antennas 1 x Battery pad 2 x propeller(Pairs) 2 x Battery strap   Notice: All iFlight BNFs are tested before shipment to guarantee highest quality.  If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Eigenschaften Size 5 inch Geometry Squashed X or DeadCat Flight Stack BLITZ Mini F7/E55 Motors 2207 1750KV Video Transmitter DJI O3 Air Unit Radio Transmitter DJI FPV RC2, ELRS, TBS (optional) GPS Module M10 chipset Max. Speed 190 km/h Weight ca. 433 (without battery)

About Description Smooth and Powerful XING2 Motors The latest upgrade of our bestseller XING motors, no compromises taken! Durable unibell (one-piece bell) technology, strong titanium alloy shaft with reinforced bell joint, crash resistant 7075 aluminum bell, smooth and long-lasting Japanese NSK bearings, center slotted N52H curved arc magnets and our XING O-ring bushing gap protection. Latest Nazgul Frame for Maximum Protection The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts. DJI O3 HD Air Unit Low-Latency digital transmission Up to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. (Source DJI) 4K Stabilized Video with 155° Ultra-Wide Angle Together with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI) Secured Battery Plug with Anti-Spark Filter Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage. Specially Designed Heatsink for DJI O3 HD Air Unit Improved cooling performance for the high power draw of the DJI O3 video transmitter. We’ve added a custom CNC heatsink for excellent heat dissipation without overheating, even on high power levels.     Specifications: Product Name: Evoque F6 V2 FC: BLITZ Mini F722 Flight Controller ESC: BLITZ Mini E55 4-IN-1 2-6S 55A ESC Video Transmission: DJI O3 Air Unit Frame wheelbase: 255mm (Squashed X) / 262 mm (DeadCat) Motor: XING2 2506 1500KV motors Prop: 6 inch propellers Weight: 480/485 grams Takeoff Weight: Approx. 680 g Dimensions (L×W×H): 196×164×36±2mm (Squashed X) / 209×162×36±2mm (DeadCat) Diagonal Distance: 120 mm Max Speed: 180 Km/H (Manual Mode) Maximum Takeoff Altitude: 3200 m Max Hover Time: Approx. 8 mins (With 1400mAh battery) Max Flight Distance: 5 km Max Wind Speed Resistance: Level 57 Operating Temperature Range：-10° to 40° C (14° to 104° F) Antennas: Dual Antennas GNSS: GPS+SBAS+Galileo+QZSS+Glonass   Video Transmission: Product Name: DJI O3 Air Unit Weight: Approx. 36.4 grams（headband included） Communication Bandwidth： Max 40 MHz FOV (single screen): 155° Communication Frequency：2.400-2.4835 GHz (RX only)  /  5.725-5.850 GHz (RX and TX) End-to-End Latency With DJI FPV Goggles V2: 810p/120fps Video Transmission Quality: The latency is lower than 28 ms. 810p/60fps Video Transmission Quality: The latency is lower than 40 ms. With DJI Goggles 2: 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms. 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms. Max Video Transmission Bitrate: 50 Mbps Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC) Operating Temperature Range: -10º to 40º C (14° to 104° F) Power Input: 7.4-26.4 V  Audio Transmission: N/A   Packing List: 1 x Evoque F6 6S HD BNF 2 x Antennas 1 x Battery pad 2 x propeller(Pairs) 2 x Battery strap   Notice: All iFlight BNFs are tested before shipment to guarantee highest quality.If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com.   Characteristics Size 6 inch Geometry Squashed X or DeadCat Flight Stack BLITZ Mini F7/E55 Motors 2506 1500KV Video Transmitter DJI O3 Air Unit Radio Transmitter DJI FPV RC2, ELRS, TBS (optional) GPS Module M10 chipset Max. Speed 180 km/h Weight ca. 480 (without battery) Description Smooth and Powerful XING2 Motors The latest upgrade of our bestseller XING motors, no compromises taken! Durable unibell (one-piece bell) technology, strong titanium alloy shaft with reinforced bell joint, crash resistant 7075 aluminum bell, smooth and long-lasting Japanese NSK bearings, center slotted N52H curved arc magnets and our XING O-ring bushing gap protection. Latest Nazgul Frame for Maximum Protection The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts. DJI O3 HD Air Unit Low-Latency digital transmission Up to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. (Source DJI) 4K Stabilized Video with 155° Ultra-Wide Angle Together with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI) Secured Battery Plug with Anti-Spark Filter Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage. Specially Designed Heatsink for DJI O3 HD Air Unit Improved cooling performance for the high power draw of the DJI O3 video transmitter. We’ve added a custom CNC heatsink for excellent heat dissipation without overheating, even on high power levels.     Specifications: Product Name: Evoque F6 V2 FC: BLITZ Mini F722 Flight Controller ESC: BLITZ Mini E55 4-IN-1 2-6S 55A ESC Video Transmission: DJI O3 Air Unit Frame wheelbase: 255mm (Squashed X) / 262 mm (DeadCat) Motor: XING2 2506 1500KV motors Prop: 6 inch propellers Weight: 480/485 grams Takeoff Weight: Approx. 680 g Dimensions (L×W×H): 196×164×36±2mm (Squashed X) / 209×162×36±2mm (DeadCat) Diagonal Distance: 120 mm Max Speed: 180 Km/H (Manual Mode) Maximum Takeoff Altitude: 3200 m Max Hover Time: Approx. 8 mins (With 1400mAh battery) Max Flight Distance: 5 km Max Wind Speed Resistance: Level 57 Operating Temperature Range：-10° to 40° C (14° to 104° F) Antennas: Dual Antennas GNSS: GPS+SBAS+Galileo+QZSS+Glonass   Video Transmission: Product Name: DJI O3 Air Unit Weight: Approx. 36.4 grams（headband included） Communication Bandwidth： Max 40 MHz FOV (single screen): 155° Communication Frequency：2.400-2.4835 GHz (RX only)  /  5.725-5.850 GHz (RX and TX) End-to-End Latency With DJI FPV Goggles V2: 810p/120fps Video Transmission Quality: The latency is lower than 28 ms. 810p/60fps Video Transmission Quality: The latency is lower than 40 ms. With DJI Goggles 2: 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms. 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms. Max Video Transmission Bitrate: 50 Mbps Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC) Operating Temperature Range: -10º to 40º C (14° to 104° F) Power Input: 7.4-26.4 V  Audio Transmission: N/A   Packing List: 1 x Evoque F6 6S HD BNF 2 x Antennas 1 x Battery pad 2 x propeller(Pairs) 2 x Battery strap   Notice: All iFlight BNFs are tested before shipment to guarantee highest quality.If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com.   Characteristics Size 6 inch Geometry Squashed X or DeadCat Flight Stack BLITZ Mini F7/E55 Motors 2506 1500KV Video Transmitter DJI O3 Air Unit Radio Transmitter DJI FPV RC2, ELRS, TBS (optional) GPS Module M10 chipset Max. Speed 180 km/h Weight ca. 480 (without battery)

About Description   Lightweight and Durable A combination of carbon fiber and aluminum ensures a lightweight yet robust structure for your camera equipment. Designed for clear video output without propellers obstructing the view, enhancing the aesthetic quality of your aerial footage. Anti-Spark Filter Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage. Enhance user experience and streamline maintenance Equipped with a built-in buzzer and receiver mount, convenient maintenance and adjustments to the receiver. DIY customized space Create your own personalized space with the flexibility of standard 20x20 and 30.5x30.5 mounting holes, ensuring compatibility with popular flight stacks and VTX systems available in the market. Tailor your setup to your liking and enjoy a seamless integration process with these versatile mounting options.   Specifications: Product Name: Nazgul XL5 ECO 6S Analog Geometry: True-X FC: BLITZ ATF435 Flight Controller ESC: BLITZ E55S 4-IN-1 ESC Video Transmission: BLITZ 1.6W VTX Frame: 245mm wheelbase Motor: XING-E Pro 2207 1800KV motors Prop: Nazgul F5 propellers Weight: 427g Takeoff Weight: Approx. 652g (With 6S 1400mAh battery) Dimensions (L×W×H): 173×173×34±2 mm Diagonal Distance: 245mm Max Speed: 190 km/h (Manual Mode) Maximum Takeoff Altitude: 3200 m Max Hover Time: Approx. 7.5 mins (No Load with 6S 1400mAh Battery) Max Wind Speed Resistance: Level 7 Operating Temperature Range：-10° to 40° C (14° to 104° F) Antennas: Single Antenna GNSS: GPS+SBAS+Galileo+QZSS+Glonass (Optional)   Video Transmission: Product Name: BLITZ 5.8G 1.6W VTX Output Power: 0-25-400-800-1600mw Input Volts: 7-34V(2-8S) Working Current: 25.2V，≤pit @20mA，≤25mw@65mA，≤400mw@130mA，≤800mw@150mA，≤1600mw@250mA Transmission fre: 40CH(A-B-E-F-R) Antenna Interface: MMCX Mounting Hole: 30.5×30.5/Φ3mm Weight: 18.9g (Antenna not included) Dimensions: 38.5×38.5mm   Packing List: 1 x Nazgul XL5 ECO 6S Analog BNF 1 x Antennas 2 x Battery pads 2 x Nazgul F5 Prop(Pairs)   Notice: All iFlight BNFs are tested before shipment to guarantee highest quality. If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Characteristics Size 5 inch Geometry X-Frame Flight Stack BLITZ ATF/E55S Motors 2207 1800KV Video Transmitter 5.8G 1.6W Radio Transmitter PNP, ELRS, TBS (optional) GPS Module (optional) M10 chipset Max. Speed 190 km/h Weight ca. 427g (without battery) Takeoff Weight ca. 652g (with 6S 1400mAh battery) Description   Lightweight and Durable A combination of carbon fiber and aluminum ensures a lightweight yet robust structure for your camera equipment. Designed for clear video output without propellers obstructing the view, enhancing the aesthetic quality of your aerial footage. Anti-Spark Filter Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage. Enhance user experience and streamline maintenance Equipped with a built-in buzzer and receiver mount, convenient maintenance and adjustments to the receiver. DIY customized space Create your own personalized space with the flexibility of standard 20x20 and 30.5x30.5 mounting holes, ensuring compatibility with popular flight stacks and VTX systems available in the market. Tailor your setup to your liking and enjoy a seamless integration process with these versatile mounting options.   Specifications: Product Name: Nazgul XL5 ECO 6S Analog Geometry: True-X FC: BLITZ ATF435 Flight Controller ESC: BLITZ E55S 4-IN-1 ESC Video Transmission: BLITZ 1.6W VTX Frame: 245mm wheelbase Motor: XING-E Pro 2207 1800KV motors Prop: Nazgul F5 propellers Weight: 427g Takeoff Weight: Approx. 652g (With 6S 1400mAh battery) Dimensions (L×W×H): 173×173×34±2 mm Diagonal Distance: 245mm Max Speed: 190 km/h (Manual Mode) Maximum Takeoff Altitude: 3200 m Max Hover Time: Approx. 7.5 mins (No Load with 6S 1400mAh Battery) Max Wind Speed Resistance: Level 7 Operating Temperature Range：-10° to 40° C (14° to 104° F) Antennas: Single Antenna GNSS: GPS+SBAS+Galileo+QZSS+Glonass (Optional)   Video Transmission: Product Name: BLITZ 5.8G 1.6W VTX Output Power: 0-25-400-800-1600mw Input Volts: 7-34V(2-8S) Working Current: 25.2V，≤pit @20mA，≤25mw@65mA，≤400mw@130mA，≤800mw@150mA，≤1600mw@250mA Transmission fre: 40CH(A-B-E-F-R) Antenna Interface: MMCX Mounting Hole: 30.5×30.5/Φ3mm Weight: 18.9g (Antenna not included) Dimensions: 38.5×38.5mm   Packing List: 1 x Nazgul XL5 ECO 6S Analog BNF 1 x Antennas 2 x Battery pads 2 x Nazgul F5 Prop(Pairs)   Notice: All iFlight BNFs are tested before shipment to guarantee highest quality. If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Characteristics Size 5 inch Geometry X-Frame Flight Stack BLITZ ATF/E55S Motors 2207 1800KV Video Transmitter 5.8G 1.6W Radio Transmitter PNP, ELRS, TBS (optional) GPS Module (optional) M10 chipset Max. Speed 190 km/h Weight ca. 427g (without battery) Takeoff Weight ca. 652g (with 6S 1400mAh battery)

About Description Need some new TPU parts for your iFlight BNF? Protective hard rubber to prevent damage to your frame and a good reduction in impact force on hard crashes. Never fly without it. All printed with high quality TPU available in various colors. Compatible with:Nazgul5 V3 Description Need some new TPU parts for your iFlight BNF? Protective hard rubber to prevent damage to your frame and a good reduction in impact force on hard crashes. Never fly without it. All printed with high quality TPU available in various colors. Compatible with:Nazgul5 V3