About Description Our latest BLITZ Mini FC used in our iFlight BNFs. Ultra fast F745 MCU with 20x20 mounting pattern. The perfect match for your new frame. Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required), FC indicator LEDs for visual debugging.   Features: Improved circuit design, better components, and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required) FC indicator LEDs for visual debugging Support Betaflight, INAV, Ardupilot firmware   Specifications: MCU: STM32F745 Gyro: ICM42688 Barometer: DPS310 OSD Chip: AT7456E Flash: 16MB (Blackbox flash) UARTS: 6 Smartaudio / IRC Tramp VTX protocol supported LED controller: Yes Beeper pad: Yes Mount pattern: 20*20mm/φ4 Dimensions: 30.5*27 mm Weight: 4.8g BEC: Output 5V 2.5A continuous output current, 3A peak current (15 seconds) BF Firmware target: IFLIGHT_BLITZ_F7_AIO Ardupilot Firmware：arduplane_with_bl   Wiring Suggestions: UART 1 for VTX HD / Analog UART 2 for a Receiver UART 3/4/5 for GPS or other sensors that require a serial port UART 6 for ESC Telemetry   Packing List: 1 x BLITZ Mini F745 Flight Controller   Wiring Diagram: https://drive.google.com/drive/u/1/folders/17Uf67I6ER_z-otviR0I7tSqO31W7S553   Note: Please use our GoogleDrive Database to download the Ardupilot firmware of the FC： https://drive.google.com/drive/folders/1r3MNTBNYSzGeRXQg45j4IJVoW1Xjk7Y0 Description Our latest BLITZ Mini FC used in our iFlight BNFs. Ultra fast F745 MCU with 20x20 mounting pattern. The perfect match for your new frame. Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required), FC indicator LEDs for visual debugging.   Features: Improved circuit design, better components, and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required) FC indicator LEDs for visual debugging Support Betaflight, INAV, Ardupilot firmware   Specifications: MCU: STM32F745 Gyro: ICM42688 Barometer: DPS310 OSD Chip: AT7456E Flash: 16MB (Blackbox flash) UARTS: 6 Smartaudio / IRC Tramp VTX protocol supported LED controller: Yes Beeper pad: Yes Mount pattern: 20*20mm/φ4 Dimensions: 30.5*27 mm Weight: 4.8g BEC: Output 5V 2.5A continuous output current, 3A peak current (15 seconds) BF Firmware target: IFLIGHT_BLITZ_F7_AIO Ardupilot Firmware：arduplane_with_bl   Wiring Suggestions: UART 1 for VTX HD / Analog UART 2 for a Receiver UART 3/4/5 for GPS or other sensors that require a serial port UART 6 for ESC Telemetry   Packing List: 1 x BLITZ Mini F745 Flight Controller   Wiring Diagram: https://drive.google.com/drive/u/1/folders/17Uf67I6ER_z-otviR0I7tSqO31W7S553   Note: Please use our GoogleDrive Database to download the Ardupilot firmware of the FC： https://drive.google.com/drive/folders/1r3MNTBNYSzGeRXQg45j4IJVoW1Xjk7Y0

About Description Built-in microphone 4 Power levels up to 2500mW; 40 Channels (including Raceband) Fast frequency lock, no startup interference with other pilots Built-in output power self-check functionality The CNC cooling casing, along with an integrated cooling fan, offers a dual heat dissipation effect.   Note: VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.   Specifications: Input voltage: 7V～34V Interface: MMCX Power levels: PIT/25mW/400mW/1000mW/2500mW Channels: 40 (including Raceband) Mounting pattern: 25.5x25.5mm/Φ1.6  Lightweight: 32g (excluding antenna) VTX telemetry: IRC Tramp Betaflight IRC Tramp Configuration: Please download the attached VTX table for Betaflight! RC Tramp VTX table values: 25mW/400mW/1000mW/2500mW   LED Indicator and Function Button: Power Button: Press and hole for 2s: Enter or exit PIT mode, solid green light indicates entering PIT mode Short press: Green light (output power): The number of LED flashing indicates the VTX output power. 1 flash=25mW, 2 flashes=400mW,3 flashes=1000mW, 4 flashes=2500mW. Short press to change output power. Band and Channel Button Press and hole for 2s: Red(BAND): The number of LED flashing indicates the BAND A-R. Press and hold for 2s to switch Band. Short press: Blue(CH): The number of LED flashing indicate the channel 1 to 8. Short press to switch the Channel.   Ports: VBAT: 2-8S，7-34V DC Positive Input GND: Negative 5v out: 5v Voltage Output IRC: IRC Tramp Signal Input GND: Negative Video in: Video Signal Input Camera in: Camera video Input Camera out:Camera video output   PDF Instructions: https://drive.google.com/drive/folders/1PangELyOFYp0kknmzMPgHx7xfat-Ggve   Packing List: 1 x BLITZ Whoop 5.8G 2.5W VTX   Attention: Please read the instructions for proper wiring before use. It is recommended that before switching on the power, make sure that the antenna has been installed, it can extend the life of the module. It is recommended to ensure the correct voltage range and the correct positive and negative polarity before switching on the power to avoid burning the components. Please keep enough space when you install the VTX to ensure air convection around the module for heat dissipation. Otherwise, the module will enable overheat protection and the power transmission will be reduced or even switched off. Description Built-in microphone 4 Power levels up to 2500mW; 40 Channels (including Raceband) Fast frequency lock, no startup interference with other pilots Built-in output power self-check functionality The CNC cooling casing, along with an integrated cooling fan, offers a dual heat dissipation effect.   Note: VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.   Specifications: Input voltage: 7V～34V Interface: MMCX Power levels: PIT/25mW/400mW/1000mW/2500mW Channels: 40 (including Raceband) Mounting pattern: 25.5x25.5mm/Φ1.6  Lightweight: 32g (excluding antenna) VTX telemetry: IRC Tramp Betaflight IRC Tramp Configuration: Please download the attached VTX table for Betaflight! RC Tramp VTX table values: 25mW/400mW/1000mW/2500mW   LED Indicator and Function Button: Power Button: Press and hole for 2s: Enter or exit PIT mode, solid green light indicates entering PIT mode Short press: Green light (output power): The number of LED flashing indicates the VTX output power. 1 flash=25mW, 2 flashes=400mW,3 flashes=1000mW, 4 flashes=2500mW. Short press to change output power. Band and Channel Button Press and hole for 2s: Red(BAND): The number of LED flashing indicates the BAND A-R. Press and hold for 2s to switch Band. Short press: Blue(CH): The number of LED flashing indicate the channel 1 to 8. Short press to switch the Channel.   Ports: VBAT: 2-8S，7-34V DC Positive Input GND: Negative 5v out: 5v Voltage Output IRC: IRC Tramp Signal Input GND: Negative Video in: Video Signal Input Camera in: Camera video Input Camera out:Camera video output   PDF Instructions: https://drive.google.com/drive/folders/1PangELyOFYp0kknmzMPgHx7xfat-Ggve   Packing List: 1 x BLITZ Whoop 5.8G 2.5W VTX   Attention: Please read the instructions for proper wiring before use. It is recommended that before switching on the power, make sure that the antenna has been installed, it can extend the life of the module. It is recommended to ensure the correct voltage range and the correct positive and negative polarity before switching on the power to avoid burning the components. Please keep enough space when you install the VTX to ensure air convection around the module for heat dissipation. Otherwise, the module will enable overheat protection and the power transmission will be reduced or even switched off.

About Description Highlights: Hybrid motor design optimized for  that can be used with both bi-blade and tri-blade 6" propellers - High-end GPS is used to minimize the risk of failure during proximity flights - Long backbone with enough space up to fit 3000mAh 6S batteries - Solid antenna mount for less ocillations when using long antennas - Gladiator shell protects from dust and water droplets - ESCs with built-in spike absorber for more reliability - Built in BEC to directly power a GoPro camera - 9-minute flight time with 3000mAh 6S Lipo - Front-mounting XT-60     Specifications: Product Name: BOB57 O3 6S HD BNF FC: BLITZ F722 ESC: BLITZ E55 55A 4-IN-1 ESC Video Transmission: DJI O3 Air Unit Frame: 280mm wheelbase Motor: XING2 2506 motors Prop: GEMFAN 6032-3 propellers Takeoff Weight: Approx. 580 g Dimensions (L×W×H)：226×166×34 mm Max Speed: 180 Km/h (Manual Mode) Maximum Takeoff Altitude: 7000 m Max Hover Time: Approx. 8 mins (With 6S 1400 no load.) Max Wind Speed Resistance: Level 7 Operating Temperature Range: -10° to 40° C (14° to 104° F) Antennas: 2 Antenna GNSS: GPS+SBAS+Galileo+QZSS+Glonass   Packing List: 1 x BOB57 6S HD BNF 2 x Antennas 2 x Battery pads 2 x Prop(Pairs)   Notice: All iFlight BNFs are tested before shipment to guarantee the highest quality.If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Characteristics Size 6 inch Geometry Squashed X Flight Stack BLITZ F7/E55 Motors 2506 1500KV Video Transmitter DJI O3 Air Unit Radio Transmitter DJI FPV RC2, ELRS, TBS (optional) GPS M10 chipset Max. Speed 180 km/h Weight ca. 580g (without battery) Description Highlights: Hybrid motor design optimized for  that can be used with both bi-blade and tri-blade 6" propellers - High-end GPS is used to minimize the risk of failure during proximity flights - Long backbone with enough space up to fit 3000mAh 6S batteries - Solid antenna mount for less ocillations when using long antennas - Gladiator shell protects from dust and water droplets - ESCs with built-in spike absorber for more reliability - Built in BEC to directly power a GoPro camera - 9-minute flight time with 3000mAh 6S Lipo - Front-mounting XT-60     Specifications: Product Name: BOB57 O3 6S HD BNF FC: BLITZ F722 ESC: BLITZ E55 55A 4-IN-1 ESC Video Transmission: DJI O3 Air Unit Frame: 280mm wheelbase Motor: XING2 2506 motors Prop: GEMFAN 6032-3 propellers Takeoff Weight: Approx. 580 g Dimensions (L×W×H)：226×166×34 mm Max Speed: 180 Km/h (Manual Mode) Maximum Takeoff Altitude: 7000 m Max Hover Time: Approx. 8 mins (With 6S 1400 no load.) Max Wind Speed Resistance: Level 7 Operating Temperature Range: -10° to 40° C (14° to 104° F) Antennas: 2 Antenna GNSS: GPS+SBAS+Galileo+QZSS+Glonass   Packing List: 1 x BOB57 6S HD BNF 2 x Antennas 2 x Battery pads 2 x Prop(Pairs)   Notice: All iFlight BNFs are tested before shipment to guarantee the highest quality.If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Characteristics Size 6 inch Geometry Squashed X Flight Stack BLITZ F7/E55 Motors 2506 1500KV Video Transmitter DJI O3 Air Unit Radio Transmitter DJI FPV RC2, ELRS, TBS (optional) GPS M10 chipset Max. Speed 180 km/h Weight ca. 580g (without battery)

About Description Smooth and Powerful XING2 Motors The latest upgrade of our bestseller XING motors, no compromises taken! Durable unibell (one-piece bell) technology, strong titanium alloy shaft with reinforced bell joint, crash resistant 7075 aluminum bell, smooth and long-lasting Japanese NSK bearings, center slotted N52H curved arc magnets, and our XING O-ring bushing gap protection. Latest Chimera7 Pro Frame for Maximum Protection The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts. Secured Battery Plug with Anti-Spark Filter Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage. GPS Pre-Installed for More Safety at A Distance GPS functionality to find your way back and Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behaviour; Setup instructions included). Custom iFlight 100mm LR antenna for best signal coverage even at long distances.   Specifications: Product Name: Chimera7 Pro V2 6S Analog FC: BLITZ F722 Flight Controller ESC: BLITZ E55 4-IN-1 2-6S 55A ESC Video Transmission: /BLITZ Whoop 1.6W VTX/ BLITZ Whoop 2.5W VTX Frame: 327mm wheelbase Motor: XING2 2809 1250KV motors Prop: HQ 7.5X3.7X3 propellers Weight: 705g(Without Battery) Dimensions (L×W×H)：270x199x34mm Max Speed: 140km/h Maximum Takeoff Altitude: 3200 m Max Hover Time: Approx. 30 mins(with 6S 8000mAh Battery) Max Flight Distance: 18 km Operating Temperature Range: -10° to 40° C (14° to 104° F) Transmission Power (EIRP): FCC: < 33 dBm / CE: < 14 dBm / SRRC: < 30 dBm Antennas: Single Antenna GNSS: GPS+SBAS+Galileo+QZSS+Glonass   Video Transmission (optional): Product Name: BLITZ Whoop 5.8G 1.6W VTX Output Power: 0-25-400-800-1600mw Input Volts: 12V Working Current: ≤pit @40mA，≤25mw@150mA，≤400mw@330mA，≤800mw@460mA，≤1600mw@660mA Transmission fre: 40CH(A-B-E-F-R) Antenna Interface: IPEX Mounting Hole: 25*25/φ1.6mm Weight: 16.5g (Antenna not included) Dimensions: 37mm*31.5mm*10mm Product Name: BLITZ Whoop 5.8G 2.5W VTX Output Power: 0-25-400-1000-2500mw Input Volts: 7-34V Working Current: ≤pit @12V 140mA, ≤25mw@12V 200mA, ≤400mw@12V 340mA, ≤1000mw@12V 480mA, ≤2500mw@12V 780mA Transmission fre: 40CH(A-B-E-F-R) Antenna Interface: MMCX Mounting Hole: 25*25/φ1.6mm Weight: 32g Dimensions: 50mm*30mm*16mm   Packing List: 1 x Chimera7 Pro V2 6S Analog BNF 1 x Battery pad 1 x Antenna 1 x Propellers(Pairs) 2 x Battery strap   Notice: All iFlight BNFs are tested before shipment to guarantee highest quality.  If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Characteristics Size 7.5 inch Geometry DeadCat Flight Stack BLITZ F7/E55 Motors 2809 1250KV Video Transmitter 5.8G 1.6W/2.5W (optional) Radio Transmitter PNP, ELRS, TBS (optional) GPS M10 chipset Max. Speed 140 km/h Weight ca. 705g (without battery) Description Smooth and Powerful XING2 Motors The latest upgrade of our bestseller XING motors, no compromises taken! Durable unibell (one-piece bell) technology, strong titanium alloy shaft with reinforced bell joint, crash resistant 7075 aluminum bell, smooth and long-lasting Japanese NSK bearings, center slotted N52H curved arc magnets, and our XING O-ring bushing gap protection. Latest Chimera7 Pro Frame for Maximum Protection The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts. Secured Battery Plug with Anti-Spark Filter Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage. GPS Pre-Installed for More Safety at A Distance GPS functionality to find your way back and Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behaviour; Setup instructions included). Custom iFlight 100mm LR antenna for best signal coverage even at long distances.   Specifications: Product Name: Chimera7 Pro V2 6S Analog FC: BLITZ F722 Flight Controller ESC: BLITZ E55 4-IN-1 2-6S 55A ESC Video Transmission: /BLITZ Whoop 1.6W VTX/ BLITZ Whoop 2.5W VTX Frame: 327mm wheelbase Motor: XING2 2809 1250KV motors Prop: HQ 7.5X3.7X3 propellers Weight: 705g(Without Battery) Dimensions (L×W×H)：270x199x34mm Max Speed: 140km/h Maximum Takeoff Altitude: 3200 m Max Hover Time: Approx. 30 mins(with 6S 8000mAh Battery) Max Flight Distance: 18 km Operating Temperature Range: -10° to 40° C (14° to 104° F) Transmission Power (EIRP): FCC: < 33 dBm / CE: < 14 dBm / SRRC: < 30 dBm Antennas: Single Antenna GNSS: GPS+SBAS+Galileo+QZSS+Glonass   Video Transmission (optional): Product Name: BLITZ Whoop 5.8G 1.6W VTX Output Power: 0-25-400-800-1600mw Input Volts: 12V Working Current: ≤pit @40mA，≤25mw@150mA，≤400mw@330mA，≤800mw@460mA，≤1600mw@660mA Transmission fre: 40CH(A-B-E-F-R) Antenna Interface: IPEX Mounting Hole: 25*25/φ1.6mm Weight: 16.5g (Antenna not included) Dimensions: 37mm*31.5mm*10mm Product Name: BLITZ Whoop 5.8G 2.5W VTX Output Power: 0-25-400-1000-2500mw Input Volts: 7-34V Working Current: ≤pit @12V 140mA, ≤25mw@12V 200mA, ≤400mw@12V 340mA, ≤1000mw@12V 480mA, ≤2500mw@12V 780mA Transmission fre: 40CH(A-B-E-F-R) Antenna Interface: MMCX Mounting Hole: 25*25/φ1.6mm Weight: 32g Dimensions: 50mm*30mm*16mm   Packing List: 1 x Chimera7 Pro V2 6S Analog BNF 1 x Battery pad 1 x Antenna 1 x Propellers(Pairs) 2 x Battery strap   Notice: All iFlight BNFs are tested before shipment to guarantee highest quality.  If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Characteristics Size 7.5 inch Geometry DeadCat Flight Stack BLITZ F7/E55 Motors 2809 1250KV Video Transmitter 5.8G 1.6W/2.5W (optional) Radio Transmitter PNP, ELRS, TBS (optional) GPS M10 chipset Max. Speed 140 km/h Weight ca. 705g (without battery)