Über Beschreibung Smooth and Powerful XING2 Motors The latest upgrade of our bestseller XING motors, no compromises taken! Durable unibell (one-piece bell) technology, strong titanium alloy shaft with reinforced bell joint, crash resistant 7075 aluminum bell, smooth and long-lasting Japanese NSK bearings, center slotted N52H curved arc magnets and our XING O-ring bushing gap protection. Latest Nazgul Frame for Maximum Protection The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts. DJI O3 HD Air Unit Low-Latency digital transmission Up to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. (Source DJI) 4K Stabilized Video with 155° Ultra-Wide Angle Together with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI) Secured Battery Plug with Anti-Spark Filter Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage. Specially Designed Heatsink for DJI O3 HD Air Unit Improved cooling performance for the high power draw of the DJI O3 video transmitter. We’ve added a custom CNC heatsink for excellent heat dissipation without overheating, even on high power levels.     Specifications: Product Name: Evoque F5 V2 FC: BLITZ Mini F722 Flight Controller ESC: BLITZ Mini E55 4-IN-1 2-6S 55A ESC Video Transmission: DJI O3 Air Unit Frame wheelbase: 225mm (Squashed X) / 223 mm (DeadCat) Motor: XING2 2207 motors Prop: Nazgul 5 inch propellers Weight: 433g/436g Takeoff Weight: Approx. 693 g/695g (With 1400mAh Battery) Dimensions (L×W×H): 172×145×36±2mm (Squashed X) / 190×136×36±2mm (DeadCat) Diagonal Distance: 225 mm Max Speed: 190 Km/h (Manual Mode) Maximum Takeoff Altitude: 5000 m Max Hover Time: Approx. 8 mins Max Flight Distance: 5 km Max Wind Speed Resistance: Level 7 Operating Temperature Range: -10° to 40° C (14° to 104° F) Antennas: Dual Antennas GNSS： GPS+SBAS+Galileo+QZSS+Glonass (Optional)   Video Transmission: Product Name: DJI O3 Air Unit Weight: Approx. 36.4 grams（headband included） Communication Bandwidth： Max 40 MHz FOV (single screen): 155° Communication Frequency：2.400-2.4835 GHz (RX only)  /  5.725-5.850 GHz (RX and TX) End-to-End Latency With DJI FPV Goggles V2: 810p/120fps Video Transmission Quality: The latency is lower than 28 ms. 810p/60fps Video Transmission Quality: The latency is lower than 40 ms. With DJI Goggles 2: 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms. 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms. Max Video Transmission Bitrate: 50 Mbps Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC) Operating Temperature Range: -10º to 40º C (14° to 104° F) Power Input: 7.4-26.4 V  Audio Transmission: N/A   Packing List: 1 x Evoque F5 6S HD BNF 2 x Antennas 1 x Battery pad 2 x propeller(Pairs) 2 x Battery strap   Notice: All iFlight BNFs are tested before shipment to guarantee highest quality.  If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Eigenschaften Size 5 inch Geometry Squashed X or DeadCat Flight Stack BLITZ Mini F7/E55 Motors 2207 1750KV Video Transmitter DJI O3 Air Unit Radio Transmitter DJI FPV RC2, ELRS, TBS (optional) GPS Module M10 chipset Max. Speed 190 km/h Weight ca. 433 (without battery) Beschreibung Smooth and Powerful XING2 Motors The latest upgrade of our bestseller XING motors, no compromises taken! Durable unibell (one-piece bell) technology, strong titanium alloy shaft with reinforced bell joint, crash resistant 7075 aluminum bell, smooth and long-lasting Japanese NSK bearings, center slotted N52H curved arc magnets and our XING O-ring bushing gap protection. Latest Nazgul Frame for Maximum Protection The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts. DJI O3 HD Air Unit Low-Latency digital transmission Up to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. (Source DJI) 4K Stabilized Video with 155° Ultra-Wide Angle Together with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI) Secured Battery Plug with Anti-Spark Filter Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage. Specially Designed Heatsink for DJI O3 HD Air Unit Improved cooling performance for the high power draw of the DJI O3 video transmitter. We’ve added a custom CNC heatsink for excellent heat dissipation without overheating, even on high power levels.     Specifications: Product Name: Evoque F5 V2 FC: BLITZ Mini F722 Flight Controller ESC: BLITZ Mini E55 4-IN-1 2-6S 55A ESC Video Transmission: DJI O3 Air Unit Frame wheelbase: 225mm (Squashed X) / 223 mm (DeadCat) Motor: XING2 2207 motors Prop: Nazgul 5 inch propellers Weight: 433g/436g Takeoff Weight: Approx. 693 g/695g (With 1400mAh Battery) Dimensions (L×W×H): 172×145×36±2mm (Squashed X) / 190×136×36±2mm (DeadCat) Diagonal Distance: 225 mm Max Speed: 190 Km/h (Manual Mode) Maximum Takeoff Altitude: 5000 m Max Hover Time: Approx. 8 mins Max Flight Distance: 5 km Max Wind Speed Resistance: Level 7 Operating Temperature Range: -10° to 40° C (14° to 104° F) Antennas: Dual Antennas GNSS： GPS+SBAS+Galileo+QZSS+Glonass (Optional)   Video Transmission: Product Name: DJI O3 Air Unit Weight: Approx. 36.4 grams（headband included） Communication Bandwidth： Max 40 MHz FOV (single screen): 155° Communication Frequency：2.400-2.4835 GHz (RX only)  /  5.725-5.850 GHz (RX and TX) End-to-End Latency With DJI FPV Goggles V2: 810p/120fps Video Transmission Quality: The latency is lower than 28 ms. 810p/60fps Video Transmission Quality: The latency is lower than 40 ms. With DJI Goggles 2: 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms. 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms. Max Video Transmission Bitrate: 50 Mbps Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC) Operating Temperature Range: -10º to 40º C (14° to 104° F) Power Input: 7.4-26.4 V  Audio Transmission: N/A   Packing List: 1 x Evoque F5 6S HD BNF 2 x Antennas 1 x Battery pad 2 x propeller(Pairs) 2 x Battery strap   Notice: All iFlight BNFs are tested before shipment to guarantee highest quality.  If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Eigenschaften Size 5 inch Geometry Squashed X or DeadCat Flight Stack BLITZ Mini F7/E55 Motors 2207 1750KV Video Transmitter DJI O3 Air Unit Radio Transmitter DJI FPV RC2, ELRS, TBS (optional) GPS Module M10 chipset Max. Speed 190 km/h Weight ca. 433 (without battery)

About Description Latest Nazgul Frame for Maximum Protection The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts. DJI O3 HD Air Unit Low-Latency digital transmission Up to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. (Source DJI) 4K Stabilized Video with 155° Ultra-Wide Angle Together with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI) Secured Battery Plug with Anti-Spark Filter Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage.     Specifications: Product Name: Evoque F4 FC: BLITZ Mini F7 Flight Controller ESC: BLITZ Mini E55S 4-IN-1 2-6S 55A ESC Video Transmission: DJI O3 Air Unit Frame wheelbase: 185mm Motor: XING 2205 2450KV motors Prop: HQ 4*3*3 propellers Takeoff Weight: Approx. 330 g (Without battery) Dimensions (L×W×H): 148.5×110×36 mm(Squashed X) / 149*110*36mm (DeadCat) Diagonal Distance: 185 mm Max Speed: 170 Km/h (Manual Mode) Maximum Takeoff Altitude: 7000 m Max Hover Time: Approx. 8 mins Max Flight Distance: 5 km Max Wind Speed Resistance: Level 5 Operating Temperature Range: -10° to 40° C (14° to 104° F) Antennas: DJI O3 Air Unit Dual-Band Antenna GNSS: GPS+SBAS+Galileo+QZSS+Glonass(Optional)   Recommended batteries: 6S 1050mAh Battery 6S 1400mAh Battery   Video Transmission: Product Name: DJI O3 Air Unit Communication Bandwidth: Max 40 MHz FOV (single screen): 155° Communication Frequency: 2.400-2.4835 GHz (RX only) / 5.725-5.850 GHz (RX and TX) End-to-End Latency With DJI FPV Goggles V2: 810p/120fps Video Transmission Quality: The latency is lower than 28 ms. 810p/60fps Video Transmission Quality: The latency is lower than 40 ms. With DJI Goggles 2: 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms. 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms. Max Video Transmission Bitrate: 50 Mbps Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC) Operating Temperature Range: -10º to 40º C (14° to 104° F) Power Input: 7.4-26.4 V  Audio Transmission: N/A   Packing List: 1 x Evoque F4 6S HD BNF 1 x DJI O3 air unit Antenna 1 x Battery pad 4 x HQ 4x3x3 propeller(Pairs) 2 x Battery strap   Notice: All iFlight BNFs are tested before shipment to guarantee the highest quality.  If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Characteristics Size 4 inch Geometry Squashed X or DeadCat Flight Stack BLITZ Mini F7/E55S Motors 2205 2450KV Video Transmitter DJI O3 Air Unit Radio Transmitter DJI FPV RC2, ELRS, TBS (optional) GPS Module M10 chipset Max. Speed 170 km/h Weight ca. 330 (without battery) Description Latest Nazgul Frame for Maximum Protection The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts. DJI O3 HD Air Unit Low-Latency digital transmission Up to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. (Source DJI) 4K Stabilized Video with 155° Ultra-Wide Angle Together with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI) Secured Battery Plug with Anti-Spark Filter Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage.     Specifications: Product Name: Evoque F4 FC: BLITZ Mini F7 Flight Controller ESC: BLITZ Mini E55S 4-IN-1 2-6S 55A ESC Video Transmission: DJI O3 Air Unit Frame wheelbase: 185mm Motor: XING 2205 2450KV motors Prop: HQ 4*3*3 propellers Takeoff Weight: Approx. 330 g (Without battery) Dimensions (L×W×H): 148.5×110×36 mm(Squashed X) / 149*110*36mm (DeadCat) Diagonal Distance: 185 mm Max Speed: 170 Km/h (Manual Mode) Maximum Takeoff Altitude: 7000 m Max Hover Time: Approx. 8 mins Max Flight Distance: 5 km Max Wind Speed Resistance: Level 5 Operating Temperature Range: -10° to 40° C (14° to 104° F) Antennas: DJI O3 Air Unit Dual-Band Antenna GNSS: GPS+SBAS+Galileo+QZSS+Glonass(Optional)   Recommended batteries: 6S 1050mAh Battery 6S 1400mAh Battery   Video Transmission: Product Name: DJI O3 Air Unit Communication Bandwidth: Max 40 MHz FOV (single screen): 155° Communication Frequency: 2.400-2.4835 GHz (RX only) / 5.725-5.850 GHz (RX and TX) End-to-End Latency With DJI FPV Goggles V2: 810p/120fps Video Transmission Quality: The latency is lower than 28 ms. 810p/60fps Video Transmission Quality: The latency is lower than 40 ms. With DJI Goggles 2: 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms. 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms. Max Video Transmission Bitrate: 50 Mbps Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC) Operating Temperature Range: -10º to 40º C (14° to 104° F) Power Input: 7.4-26.4 V  Audio Transmission: N/A   Packing List: 1 x Evoque F4 6S HD BNF 1 x DJI O3 air unit Antenna 1 x Battery pad 4 x HQ 4x3x3 propeller(Pairs) 2 x Battery strap   Notice: All iFlight BNFs are tested before shipment to guarantee the highest quality.  If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Characteristics Size 4 inch Geometry Squashed X or DeadCat Flight Stack BLITZ Mini F7/E55S Motors 2205 2450KV Video Transmitter DJI O3 Air Unit Radio Transmitter DJI FPV RC2, ELRS, TBS (optional) GPS Module M10 chipset Max. Speed 170 km/h Weight ca. 330 (without battery)

About Description Smooth and Powerful XING2 Motors The latest upgrade of our bestseller XING motors, no compromises taken! Durable unibell (one-piece bell) technology, strong titanium alloy shaft with reinforced bell joint, crash resistant 7075 aluminum bell, smooth and long-lasting Japanese NSK bearings, center slotted N52H curved arc magnets, and our XING O-ring bushing gap protection. Latest Chimera7 Pro Frame for Maximum Protection The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts. Secured Battery Plug with Anti-Spark Filter Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage. GPS Pre-Installed for More Safety at A Distance GPS functionality to find your way back and Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behaviour; Setup instructions included). Custom iFlight 100mm LR antenna for best signal coverage even at long distances.   Specifications: Product Name: Chimera7 Pro V2 6S Analog FC: BLITZ F722 Flight Controller ESC: BLITZ E55 4-IN-1 2-6S 55A ESC Video Transmission: /BLITZ Whoop 1.6W VTX/ BLITZ Whoop 2.5W VTX Frame: 327mm wheelbase Motor: XING2 2809 1250KV motors Prop: HQ 7.5X3.7X3 propellers Weight: 705g(Without Battery) Dimensions (L×W×H)：270x199x34mm Max Speed: 140km/h Maximum Takeoff Altitude: 3200 m Max Hover Time: Approx. 30 mins(with 6S 8000mAh Battery) Max Flight Distance: 18 km Operating Temperature Range: -10° to 40° C (14° to 104° F) Transmission Power (EIRP): FCC: < 33 dBm / CE: < 14 dBm / SRRC: < 30 dBm Antennas: Single Antenna GNSS: GPS+SBAS+Galileo+QZSS+Glonass   Video Transmission (optional): Product Name: BLITZ Whoop 5.8G 1.6W VTX Output Power: 0-25-400-800-1600mw Input Volts: 12V Working Current: ≤pit @40mA，≤25mw@150mA，≤400mw@330mA，≤800mw@460mA，≤1600mw@660mA Transmission fre: 40CH(A-B-E-F-R) Antenna Interface: IPEX Mounting Hole: 25*25/φ1.6mm Weight: 16.5g (Antenna not included) Dimensions: 37mm*31.5mm*10mm Product Name: BLITZ Whoop 5.8G 2.5W VTX Output Power: 0-25-400-1000-2500mw Input Volts: 7-34V Working Current: ≤pit @12V 140mA, ≤25mw@12V 200mA, ≤400mw@12V 340mA, ≤1000mw@12V 480mA, ≤2500mw@12V 780mA Transmission fre: 40CH(A-B-E-F-R) Antenna Interface: MMCX Mounting Hole: 25*25/φ1.6mm Weight: 32g Dimensions: 50mm*30mm*16mm   Packing List: 1 x Chimera7 Pro V2 6S Analog BNF 1 x Battery pad 1 x Antenna 1 x Propellers(Pairs) 2 x Battery strap   Notice: All iFlight BNFs are tested before shipment to guarantee highest quality.  If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Characteristics Size 7.5 inch Geometry DeadCat Flight Stack BLITZ F7/E55 Motors 2809 1250KV Video Transmitter 5.8G 1.6W/2.5W (optional) Radio Transmitter PNP, ELRS, TBS (optional) GPS M10 chipset Max. Speed 140 km/h Weight ca. 705g (without battery) Description Smooth and Powerful XING2 Motors The latest upgrade of our bestseller XING motors, no compromises taken! Durable unibell (one-piece bell) technology, strong titanium alloy shaft with reinforced bell joint, crash resistant 7075 aluminum bell, smooth and long-lasting Japanese NSK bearings, center slotted N52H curved arc magnets, and our XING O-ring bushing gap protection. Latest Chimera7 Pro Frame for Maximum Protection The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts. Secured Battery Plug with Anti-Spark Filter Plugging in a battery can create a loud spark at the connector which is caused by the high battery current rushing into the low ESR capacitor first as well as filling up ESC capacitance. We’ve added a protective circuit to extend the lifespan of XT60 connectors and prevent rapid voltage or current spikes which can protect your electronics from damage. GPS Pre-Installed for More Safety at A Distance GPS functionality to find your way back and Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behaviour; Setup instructions included). Custom iFlight 100mm LR antenna for best signal coverage even at long distances.   Specifications: Product Name: Chimera7 Pro V2 6S Analog FC: BLITZ F722 Flight Controller ESC: BLITZ E55 4-IN-1 2-6S 55A ESC Video Transmission: /BLITZ Whoop 1.6W VTX/ BLITZ Whoop 2.5W VTX Frame: 327mm wheelbase Motor: XING2 2809 1250KV motors Prop: HQ 7.5X3.7X3 propellers Weight: 705g(Without Battery) Dimensions (L×W×H)：270x199x34mm Max Speed: 140km/h Maximum Takeoff Altitude: 3200 m Max Hover Time: Approx. 30 mins(with 6S 8000mAh Battery) Max Flight Distance: 18 km Operating Temperature Range: -10° to 40° C (14° to 104° F) Transmission Power (EIRP): FCC: < 33 dBm / CE: < 14 dBm / SRRC: < 30 dBm Antennas: Single Antenna GNSS: GPS+SBAS+Galileo+QZSS+Glonass   Video Transmission (optional): Product Name: BLITZ Whoop 5.8G 1.6W VTX Output Power: 0-25-400-800-1600mw Input Volts: 12V Working Current: ≤pit @40mA，≤25mw@150mA，≤400mw@330mA，≤800mw@460mA，≤1600mw@660mA Transmission fre: 40CH(A-B-E-F-R) Antenna Interface: IPEX Mounting Hole: 25*25/φ1.6mm Weight: 16.5g (Antenna not included) Dimensions: 37mm*31.5mm*10mm Product Name: BLITZ Whoop 5.8G 2.5W VTX Output Power: 0-25-400-1000-2500mw Input Volts: 7-34V Working Current: ≤pit @12V 140mA, ≤25mw@12V 200mA, ≤400mw@12V 340mA, ≤1000mw@12V 480mA, ≤2500mw@12V 780mA Transmission fre: 40CH(A-B-E-F-R) Antenna Interface: MMCX Mounting Hole: 25*25/φ1.6mm Weight: 32g Dimensions: 50mm*30mm*16mm   Packing List: 1 x Chimera7 Pro V2 6S Analog BNF 1 x Battery pad 1 x Antenna 1 x Propellers(Pairs) 2 x Battery strap   Notice: All iFlight BNFs are tested before shipment to guarantee highest quality.  If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Characteristics Size 7.5 inch Geometry DeadCat Flight Stack BLITZ F7/E55 Motors 2809 1250KV Video Transmitter 5.8G 1.6W/2.5W (optional) Radio Transmitter PNP, ELRS, TBS (optional) GPS M10 chipset Max. Speed 140 km/h Weight ca. 705g (without battery)

About Description We're proud to announce the release of the X413 analog BNF, X413 8S Analog is a 13" BNF quadcopter that comes with the BLITZ Whoop  VTX Video Transmission System, and HQ  13" 3-Blade  propellers. The X413 has been pre-tuned and set up with everything you need, all you need to do is bind-and-fly! Loaded with lots of power; it comes with the XING 4214 motors, BLITZ F7 Pro Flight Controller, and the BLITZ E80 Pro 4-IN-1 ESC, which make this quad a must-have!   Specifications: Product Name: X413 Analog 13 inch FC: BLITZ F7 Pro Flight Controller ESC: BLITZ E80 4-IN-1 Pro ESC Video Transmission: BLITZ Whoop 1.2G 1.6W VTX/ 5.8G  2.5W VTX Frame: 599mm wheelbase Motor: XING 4214 motors Prop: 13X9X3 propellers Weight: 2070g (Without Battery) Dimensions (L×W×H)：425x425x26mm Max Speed: 140km/h Maximum Takeoff Altitude: 6000 m Max Hover Time: Approx. 18 mins (with 8S 5600mAh no load) 7mins (With 8S  5600mAh 4KG load) 5mins (With 8S 5600mAh 6KG load) Max Wind Speed Resistance: Level 8 Operating Temperature Range: -10° to 40° C (14° to 104° F) Antennas: Single Antenna GNSS: GPS+SBAS+Galileo+QZSS+Glonass   Video Transmission: Product Name: BLITZ Whoop 5.8G 2.5W VTX Output Power: 0-25-400-1000-2500mw Input Volts: 7-34V Working Current: ≤pit @12V 140mA, ≤25mw@12V 200mA, ≤400mw@12V 340mA, ≤1000mw@12V 480mA, ≤2500mw@12V 780mA Transmission fre: 40CH(A-B-E-F-R) Antenna Interface: MMCX Mounting Hole: 25*25/φ1.6mm Weight: 32g Dimensions: 50*30*16mm   Packing List: 1 x X413 8S Analog BNF 1 x Battery pad 1 x Antennas 2 x Propellers(Pair) 3 x Battery straps 1 x Screw Bag   Notice: All iFlight BNFs are tested before shipment to guarantee highest quality. If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Characteristics Size 13 inch Geometry X Frame Flight Stack BLITZ F7 Pro/E80 Motors 4214 Video Transmitter 5.8G/1.2G (optional) Radio Transmitter DJI FPV RC2, ELRS, TBS (optional) GPS Module M10 chipset Max. Speed 140 km/h Weight ca. 2070 (without battery) Description We're proud to announce the release of the X413 analog BNF, X413 8S Analog is a 13" BNF quadcopter that comes with the BLITZ Whoop  VTX Video Transmission System, and HQ  13" 3-Blade  propellers. The X413 has been pre-tuned and set up with everything you need, all you need to do is bind-and-fly! Loaded with lots of power; it comes with the XING 4214 motors, BLITZ F7 Pro Flight Controller, and the BLITZ E80 Pro 4-IN-1 ESC, which make this quad a must-have!   Specifications: Product Name: X413 Analog 13 inch FC: BLITZ F7 Pro Flight Controller ESC: BLITZ E80 4-IN-1 Pro ESC Video Transmission: BLITZ Whoop 1.2G 1.6W VTX/ 5.8G  2.5W VTX Frame: 599mm wheelbase Motor: XING 4214 motors Prop: 13X9X3 propellers Weight: 2070g (Without Battery) Dimensions (L×W×H)：425x425x26mm Max Speed: 140km/h Maximum Takeoff Altitude: 6000 m Max Hover Time: Approx. 18 mins (with 8S 5600mAh no load) 7mins (With 8S  5600mAh 4KG load) 5mins (With 8S 5600mAh 6KG load) Max Wind Speed Resistance: Level 8 Operating Temperature Range: -10° to 40° C (14° to 104° F) Antennas: Single Antenna GNSS: GPS+SBAS+Galileo+QZSS+Glonass   Video Transmission: Product Name: BLITZ Whoop 5.8G 2.5W VTX Output Power: 0-25-400-1000-2500mw Input Volts: 7-34V Working Current: ≤pit @12V 140mA, ≤25mw@12V 200mA, ≤400mw@12V 340mA, ≤1000mw@12V 480mA, ≤2500mw@12V 780mA Transmission fre: 40CH(A-B-E-F-R) Antenna Interface: MMCX Mounting Hole: 25*25/φ1.6mm Weight: 32g Dimensions: 50*30*16mm   Packing List: 1 x X413 8S Analog BNF 1 x Battery pad 1 x Antennas 2 x Propellers(Pair) 3 x Battery straps 1 x Screw Bag   Notice: All iFlight BNFs are tested before shipment to guarantee highest quality. If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Characteristics Size 13 inch Geometry X Frame Flight Stack BLITZ F7 Pro/E80 Motors 4214 Video Transmitter 5.8G/1.2G (optional) Radio Transmitter DJI FPV RC2, ELRS, TBS (optional) GPS Module M10 chipset Max. Speed 140 km/h Weight ca. 2070 (without battery)

About Description   Optimised Motors & Propeller This latest XING motor was optimised between thrust and efficiency. Perfectly tuned to the 10 inch Gemfan propellers.  Aero-Shell The unique aerodynamic shell allows for easy maintenance while protecting the cores of the power train. Users can simply open and close the shell when working on the drone. The idea was to protect the inside but give people full access when maintenance work is being performed on the drone.  Innovative A-Frame for Maximum Performance The frame was scientifically optimised and tested over months to find the balance between stability and weight. The A-Frame design minimises vibrations as well as torsion, one of the biggest problems with larger drones.  USB-C Power A USB-C Plug was added so you can power your action cam when running out of power. This was also built in for potential upcoming new small cameras making Helion more future proof DJI O3 HD Air Unit Low-Latency Digital Transmission  Up to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. (Source DJI) 4K Stabilized Video with 155° Ultra-Wide Angle Together with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI) GPS Pre-Installed for More Safety at A Distance GPS functionality to find your way back on those ultra long range missions. Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behaviour; Setup instructions included). Custom iFlight 100mm LR antenna for best signal coverage even at long distances.   Specifications: Product Name: Helion10 O3 6S HD FC: BLITZ F7 Flight Controller ESC: BLITZ E55 4-IN-1 2-6S 55A ESC Video Transmission: DJI O3 Air Unit Geometry: A-Frame Frame: 418mm wheelbase Motor: XING2 3110 900KV motors Prop: GEMFAN 1050 propellers Weight: 950±20g (Without Battery) Dimensions (L×W×H)：324x264x63mm Max Speed: 140km/h Maximum Takeoff Altitude: 7000 m Max Hover Time: Approx. 26mins with 6S Lipo 5600mAh battery / 30mins with 6S 8000mAh Liion battery Max Cruising Time: Approx. 23mins with 6S Lipo 5600mAh battery / 26mins with 6S 8000mAh Liion battery Operating Temperature Range: -20° to 40° C  Antennas: Dual Antennas GNSS: GPS+SBAS+Galileo+QZSS+Glonass   Video Transmission: Product Name: DJI O3 Air Unit Communication Bandwidth: Max 40 MHz FOV (single screen): 155° Communication Frequency：2.400-2.4835 GHz (RX only)  /  5.725-5.850 GHz (RX and TX) End-to-End Latency With DJI FPV Goggles V2: 810p/120fps Video Transmission Quality: The latency is lower than 28 ms. 810p/60fps Video Transmission Quality: The latency is lower than 40 ms. With DJI Goggles 2: 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms. 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms. Max Video Transmission Bitrate: 50 Mbps Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC) Operating Temperature Range: -10º to 40º C (14° to 104° F) Power Input: 7.4-26.4 V  Audio Transmission: N/A   Packing List: 1 x Helion 10 6S HD 2 x Battery pad 2 x GEMFAN 1050 propellers(Pairs) 2 x Battery strap 1 x Screw bag 1 x Amass XT90 to XT60 H Adapter Cable   Notice: All iFlight BNFs are tested before shipment to guarantee highest quality.  If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Characteristics Size 10 inch Geometry DeadCat Flight Stack BLITZ F7/E55 Motors 3110 900KV Video Transmitter DJI O3 Air Unit Radio Transmitter DJI FPV RC2, ELRS, TBS (optional) GPS Module M10 chipset Max. Speed 140 km/h Weight ca. 950 (without battery) Description   Optimised Motors & Propeller This latest XING motor was optimised between thrust and efficiency. Perfectly tuned to the 10 inch Gemfan propellers.  Aero-Shell The unique aerodynamic shell allows for easy maintenance while protecting the cores of the power train. Users can simply open and close the shell when working on the drone. The idea was to protect the inside but give people full access when maintenance work is being performed on the drone.  Innovative A-Frame for Maximum Performance The frame was scientifically optimised and tested over months to find the balance between stability and weight. The A-Frame design minimises vibrations as well as torsion, one of the biggest problems with larger drones.  USB-C Power A USB-C Plug was added so you can power your action cam when running out of power. This was also built in for potential upcoming new small cameras making Helion more future proof DJI O3 HD Air Unit Low-Latency Digital Transmission  Up to 10 km video transmission range, enjoy a crisp and smooth real-time view in your goggles, even in environments with interference. (Source DJI) 4K Stabilized Video with 155° Ultra-Wide Angle Together with high-grade imaging performance, it delivers exceptional visuals that will keep your audience on the edge of their seats. (Source DJI) GPS Pre-Installed for More Safety at A Distance GPS functionality to find your way back on those ultra long range missions. Betaflight GPS Rescue mode ready to setup (default OFF to prevent unexpected behaviour; Setup instructions included). Custom iFlight 100mm LR antenna for best signal coverage even at long distances.   Specifications: Product Name: Helion10 O3 6S HD FC: BLITZ F7 Flight Controller ESC: BLITZ E55 4-IN-1 2-6S 55A ESC Video Transmission: DJI O3 Air Unit Geometry: A-Frame Frame: 418mm wheelbase Motor: XING2 3110 900KV motors Prop: GEMFAN 1050 propellers Weight: 950±20g (Without Battery) Dimensions (L×W×H)：324x264x63mm Max Speed: 140km/h Maximum Takeoff Altitude: 7000 m Max Hover Time: Approx. 26mins with 6S Lipo 5600mAh battery / 30mins with 6S 8000mAh Liion battery Max Cruising Time: Approx. 23mins with 6S Lipo 5600mAh battery / 26mins with 6S 8000mAh Liion battery Operating Temperature Range: -20° to 40° C  Antennas: Dual Antennas GNSS: GPS+SBAS+Galileo+QZSS+Glonass   Video Transmission: Product Name: DJI O3 Air Unit Communication Bandwidth: Max 40 MHz FOV (single screen): 155° Communication Frequency：2.400-2.4835 GHz (RX only)  /  5.725-5.850 GHz (RX and TX) End-to-End Latency With DJI FPV Goggles V2: 810p/120fps Video Transmission Quality: The latency is lower than 28 ms. 810p/60fps Video Transmission Quality: The latency is lower than 40 ms. With DJI Goggles 2: 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms. 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms. Max Video Transmission Bitrate: 50 Mbps Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC) Operating Temperature Range: -10º to 40º C (14° to 104° F) Power Input: 7.4-26.4 V  Audio Transmission: N/A   Packing List: 1 x Helion 10 6S HD 2 x Battery pad 2 x GEMFAN 1050 propellers(Pairs) 2 x Battery strap 1 x Screw bag 1 x Amass XT90 to XT60 H Adapter Cable   Notice: All iFlight BNFs are tested before shipment to guarantee highest quality.  If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Characteristics Size 10 inch Geometry DeadCat Flight Stack BLITZ F7/E55 Motors 3110 900KV Video Transmitter DJI O3 Air Unit Radio Transmitter DJI FPV RC2, ELRS, TBS (optional) GPS Module M10 chipset Max. Speed 140 km/h Weight ca. 950 (without battery)

About Description Built-in microphone 4 Power levels up to 2500mW; 40 Channels (including Raceband) Fast frequency lock, no startup interference with other pilots Built-in output power self-check functionality The CNC cooling casing, along with an integrated cooling fan, offers a dual heat dissipation effect.   Note: VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.   Specifications: Input voltage: 7V～34V Interface: MMCX Power levels: PIT/25mW/400mW/1000mW/2500mW Channels: 40 (including Raceband) Mounting pattern: 25.5x25.5mm/Φ1.6  Lightweight: 32g (excluding antenna) VTX telemetry: IRC Tramp Betaflight IRC Tramp Configuration: Please download the attached VTX table for Betaflight! RC Tramp VTX table values: 25mW/400mW/1000mW/2500mW   LED Indicator and Function Button: Power Button: Press and hole for 2s: Enter or exit PIT mode, solid green light indicates entering PIT mode Short press: Green light (output power): The number of LED flashing indicates the VTX output power. 1 flash=25mW, 2 flashes=400mW,3 flashes=1000mW, 4 flashes=2500mW. Short press to change output power. Band and Channel Button Press and hole for 2s: Red(BAND): The number of LED flashing indicates the BAND A-R. Press and hold for 2s to switch Band. Short press: Blue(CH): The number of LED flashing indicate the channel 1 to 8. Short press to switch the Channel.   Ports: VBAT: 2-8S，7-34V DC Positive Input GND: Negative 5v out: 5v Voltage Output IRC: IRC Tramp Signal Input GND: Negative Video in: Video Signal Input Camera in: Camera video Input Camera out:Camera video output   PDF Instructions: https://drive.google.com/drive/folders/1PangELyOFYp0kknmzMPgHx7xfat-Ggve   Packing List: 1 x BLITZ Whoop 5.8G 2.5W VTX   Attention: Please read the instructions for proper wiring before use. It is recommended that before switching on the power, make sure that the antenna has been installed, it can extend the life of the module. It is recommended to ensure the correct voltage range and the correct positive and negative polarity before switching on the power to avoid burning the components. Please keep enough space when you install the VTX to ensure air convection around the module for heat dissipation. Otherwise, the module will enable overheat protection and the power transmission will be reduced or even switched off. Description Built-in microphone 4 Power levels up to 2500mW; 40 Channels (including Raceband) Fast frequency lock, no startup interference with other pilots Built-in output power self-check functionality The CNC cooling casing, along with an integrated cooling fan, offers a dual heat dissipation effect.   Note: VTX is set to 25mW by default! Power levels above 25mW require a HAM license or have to be approved by local authorities! Please ensure you're flying legal frequencies and use our prepared Betaflight VTX tables according to your region.   Specifications: Input voltage: 7V～34V Interface: MMCX Power levels: PIT/25mW/400mW/1000mW/2500mW Channels: 40 (including Raceband) Mounting pattern: 25.5x25.5mm/Φ1.6  Lightweight: 32g (excluding antenna) VTX telemetry: IRC Tramp Betaflight IRC Tramp Configuration: Please download the attached VTX table for Betaflight! RC Tramp VTX table values: 25mW/400mW/1000mW/2500mW   LED Indicator and Function Button: Power Button: Press and hole for 2s: Enter or exit PIT mode, solid green light indicates entering PIT mode Short press: Green light (output power): The number of LED flashing indicates the VTX output power. 1 flash=25mW, 2 flashes=400mW,3 flashes=1000mW, 4 flashes=2500mW. Short press to change output power. Band and Channel Button Press and hole for 2s: Red(BAND): The number of LED flashing indicates the BAND A-R. Press and hold for 2s to switch Band. Short press: Blue(CH): The number of LED flashing indicate the channel 1 to 8. Short press to switch the Channel.   Ports: VBAT: 2-8S，7-34V DC Positive Input GND: Negative 5v out: 5v Voltage Output IRC: IRC Tramp Signal Input GND: Negative Video in: Video Signal Input Camera in: Camera video Input Camera out:Camera video output   PDF Instructions: https://drive.google.com/drive/folders/1PangELyOFYp0kknmzMPgHx7xfat-Ggve   Packing List: 1 x BLITZ Whoop 5.8G 2.5W VTX   Attention: Please read the instructions for proper wiring before use. It is recommended that before switching on the power, make sure that the antenna has been installed, it can extend the life of the module. It is recommended to ensure the correct voltage range and the correct positive and negative polarity before switching on the power to avoid burning the components. Please keep enough space when you install the VTX to ensure air convection around the module for heat dissipation. Otherwise, the module will enable overheat protection and the power transmission will be reduced or even switched off.

About Description The BLITZ ESC features step-down switch mode, high-efficiency synchronous rectification, and the ability to step down from an input voltage of up to 35V to a low output stable voltage, which makes it ideal for step-down voltage applications. It offers a very compact solution to achieve 2A/3A output current over a wide input supply voltage (6 to 35V).   Features: Step-down switch mode High-efficiency synchronous Wide 6V to 35V Input voltage range The voltage output can be 5V or 12V adjustable. (default 5V)   Specifications: Input voltage: 6-35V Output voltage / current: 5V or 12V. Average 2A / Peak 3A Conversion efficiency: the average efficiency of output 12V is above 92%, and the average efficiency of output 5V is above 88%. Size: 12*14*4.5mm Pins distance: 2.55mm Weight: 1.8g   Packing List: 1 x BLITZ PSM BXN 5D2UD6 BEC 1 x Connecting cables Description The BLITZ ESC features step-down switch mode, high-efficiency synchronous rectification, and the ability to step down from an input voltage of up to 35V to a low output stable voltage, which makes it ideal for step-down voltage applications. It offers a very compact solution to achieve 2A/3A output current over a wide input supply voltage (6 to 35V).   Features: Step-down switch mode High-efficiency synchronous Wide 6V to 35V Input voltage range The voltage output can be 5V or 12V adjustable. (default 5V)   Specifications: Input voltage: 6-35V Output voltage / current: 5V or 12V. Average 2A / Peak 3A Conversion efficiency: the average efficiency of output 12V is above 92%, and the average efficiency of output 5V is above 88%. Size: 12*14*4.5mm Pins distance: 2.55mm Weight: 1.8g   Packing List: 1 x BLITZ PSM BXN 5D2UD6 BEC 1 x Connecting cables

About Description The next generation of ESCs from iFlight has arrived. These new 55Amp BLHeli32 BLITZ 4in1 ESCs can handle even the most amp-hungry motors. Lager Mosfets and bigger PCB for maximum heat dissipation. Powerful 55A for 2-6S batteries and 20x20 mounting pattern. The perfect match for the BLITZ Flight Controller series.   Features: Larger MOSFET for more durable Better heat dissipation Safer with high redundancy Outstanding performance   Specifications: Product Name: BLITZ E55R 4-IN-1 ESC (G2) Input Voltage: 2-6S Max. Continuous Current: 55A Max. Burst Current: 65A  MCU: G071 BEC: No Firmware: BLHeli32 Current Sensor: Yes Current rate: 200 Telemetry: Supported Target: IFLIGHT_BLITZ_G2 Mounting Holes: 20 x20 mm/Φ4mm Weight: 15.3g Protocol: Supports DShot150/300/600/MultiShot/ OneShot etc. Compatibility: Mach R5 V1/Sport Frame kit AOS 5R Frame kit   Not suitable: Nazgul Evoque F5 Nazgul Evoque F6   Packing List: 1 x BLITZ E55R 4-IN-1 2-6S ESC 1 x Power cables & ESC signal wires Description The next generation of ESCs from iFlight has arrived. These new 55Amp BLHeli32 BLITZ 4in1 ESCs can handle even the most amp-hungry motors. Lager Mosfets and bigger PCB for maximum heat dissipation. Powerful 55A for 2-6S batteries and 20x20 mounting pattern. The perfect match for the BLITZ Flight Controller series.   Features: Larger MOSFET for more durable Better heat dissipation Safer with high redundancy Outstanding performance   Specifications: Product Name: BLITZ E55R 4-IN-1 ESC (G2) Input Voltage: 2-6S Max. Continuous Current: 55A Max. Burst Current: 65A  MCU: G071 BEC: No Firmware: BLHeli32 Current Sensor: Yes Current rate: 200 Telemetry: Supported Target: IFLIGHT_BLITZ_G2 Mounting Holes: 20 x20 mm/Φ4mm Weight: 15.3g Protocol: Supports DShot150/300/600/MultiShot/ OneShot etc. Compatibility: Mach R5 V1/Sport Frame kit AOS 5R Frame kit   Not suitable: Nazgul Evoque F5 Nazgul Evoque F6   Packing List: 1 x BLITZ E55R 4-IN-1 2-6S ESC 1 x Power cables & ESC signal wires