About Description Latest Chimera7 ECO Frame for Maximum Protection The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts. Economic and Efficient Electrical System A super stiff frame for minimum resonance and XING-E 2809 motors for 7.5inch prop control. Equipped with the powerful BLITZ ATF435 Flight Controller, BLITZ 1.6W/2.5W Whoop VTX, and the BLITZ E55S 4-in-1 ESC, this setup offers a high level of power and functionality.   Specifications: Product Name: Chimera7 ECO 6S Analog FC: BLITZ ATF435 Flight Controller ESC: BLITZ E55S 4-IN-1 2-6S 55A ESC Video Transmission: BLITZ Whoop 1.6W VTX / BLITZ Whoop 2.5W VTX Frame: 327mm wheelbase Motor: XING-E 2809 1250KV motors Prop: 7.5X3.7X3 propellers Weight: 660g(Without Battery) Dimensions (L×W×H)：270x199x34mm Max Speed: 140km/h Maximum Takeoff Altitude: 7000 m Max Hover Time: Approx. 30 mins（With 6S2P 8000mAh Battery) Operating Temperature Range: -10° to 40° C (14° to 104° F) Transmission Power (EIRP): FCC: < 33 dBm / CE: < 14 dBm / SRRC: < 30 dBm Antennas: Single Antennas GNSS: GPS+SBAS+Galileo+QZSS+Glonass (Optional)   Video Transmission optional: Product Name: BLITZ Whoop 5.8G 1.6W VTX Output Power: 0-25-400-800-1600mw Input Volts: 12V Working Current: ≤pit @40mA，≤25mw@150mA，≤400mw@330mA，≤800mw@460mA，≤1600mw@660mA Transmission fre: 40CH(A-B-E-F-R) Antenna Interface: IPEX Mounting Hole: 25*25/φ1.6mm Weight: 16.5g (Antenna not included) Dimensions: 37*31.5*10mm   Product Name: BLITZ Whoop 5.8G 2.5W VTX Output Power: 0-25-400-1000-2500mw Input Volts: 7-34V Working Current: ≤pit @12V 140mA, ≤25mw@12V 200mA, ≤400mw@12V 340mA, ≤1000mw@12V 480mA, ≤2500mw@12V 780mA Transmission fre: 40CH(A-B-E-F-R) Antenna Interface: MMCX Mounting Hole: 25*25/φ1.6mm Weight: 32g Dimensions: 50*30*16mm   Packing List: 1 x Chimera7 ECO 6S Analog BNF 1 x Battery pad 1 x Antenna 2 x Propellers(Pairs) 2 x Battery strap   Notice: All iFlight BNFs are tested before shipment to guarantee the highest quality.  If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Characteristics Size 7.5 inch Geometry X Frame Flight Stack BLITZ ATF/E55S Motors 2809 1250KV Video Transmitter 5.8G 1.6W/2.5W (optional) Radio Transmitter PNP, ELRS, TBS (optional) GPS (optional) M10 chipset Max. Speed 140 km/h Weight ca. 660g (without battery) Description Latest Chimera7 ECO Frame for Maximum Protection The old days are over, getting your electronics full of dirt and wet grass every time you crash. Our latest frame reduces contamination that could build up on your flight controller or ESCs, preventing failure or short circuits. Strategic airflow to keep your components cool and clean without taking any shortcuts in weight or performance. Illuminated side panels and 360-degree TPU protective parts. Economic and Efficient Electrical System A super stiff frame for minimum resonance and XING-E 2809 motors for 7.5inch prop control. Equipped with the powerful BLITZ ATF435 Flight Controller, BLITZ 1.6W/2.5W Whoop VTX, and the BLITZ E55S 4-in-1 ESC, this setup offers a high level of power and functionality.   Specifications: Product Name: Chimera7 ECO 6S Analog FC: BLITZ ATF435 Flight Controller ESC: BLITZ E55S 4-IN-1 2-6S 55A ESC Video Transmission: BLITZ Whoop 1.6W VTX / BLITZ Whoop 2.5W VTX Frame: 327mm wheelbase Motor: XING-E 2809 1250KV motors Prop: 7.5X3.7X3 propellers Weight: 660g(Without Battery) Dimensions (L×W×H)：270x199x34mm Max Speed: 140km/h Maximum Takeoff Altitude: 7000 m Max Hover Time: Approx. 30 mins（With 6S2P 8000mAh Battery) Operating Temperature Range: -10° to 40° C (14° to 104° F) Transmission Power (EIRP): FCC: < 33 dBm / CE: < 14 dBm / SRRC: < 30 dBm Antennas: Single Antennas GNSS: GPS+SBAS+Galileo+QZSS+Glonass (Optional)   Video Transmission optional: Product Name: BLITZ Whoop 5.8G 1.6W VTX Output Power: 0-25-400-800-1600mw Input Volts: 12V Working Current: ≤pit @40mA，≤25mw@150mA，≤400mw@330mA，≤800mw@460mA，≤1600mw@660mA Transmission fre: 40CH(A-B-E-F-R) Antenna Interface: IPEX Mounting Hole: 25*25/φ1.6mm Weight: 16.5g (Antenna not included) Dimensions: 37*31.5*10mm   Product Name: BLITZ Whoop 5.8G 2.5W VTX Output Power: 0-25-400-1000-2500mw Input Volts: 7-34V Working Current: ≤pit @12V 140mA, ≤25mw@12V 200mA, ≤400mw@12V 340mA, ≤1000mw@12V 480mA, ≤2500mw@12V 780mA Transmission fre: 40CH(A-B-E-F-R) Antenna Interface: MMCX Mounting Hole: 25*25/φ1.6mm Weight: 32g Dimensions: 50*30*16mm   Packing List: 1 x Chimera7 ECO 6S Analog BNF 1 x Battery pad 1 x Antenna 2 x Propellers(Pairs) 2 x Battery strap   Notice: All iFlight BNFs are tested before shipment to guarantee the highest quality.  If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Characteristics Size 7.5 inch Geometry X Frame Flight Stack BLITZ ATF/E55S Motors 2809 1250KV Video Transmitter 5.8G 1.6W/2.5W (optional) Radio Transmitter PNP, ELRS, TBS (optional) GPS (optional) M10 chipset Max. Speed 140 km/h Weight ca. 660g (without battery)

About Description Advanced Patent Pending Anti-Vibration TechnologySay goodbye to unwanted vibrations that can hinder your drone's performance. The AOS 3.5 V5 boasts the new patent pending AOS X-Cell anti-vibration mount for the flight control stack, reducing vibrations by up to 50% (compared to AOS 3.5 EVO). This groundbreaking feature enables you to run lower filtering, dial in higher PID gains, and achieve unparalleled flight performance. Durable and Versatile 7075 Aluminium Camera CageThe AOS 3.5 V5 is equipped with an ultra-durable 7075 Aluminium Camera Cage that accommodates all 19-20mm cameras, ensuring perfect compatibility with a wide range of camera systems. It includes an integrated soft mount specifically designed for the DJI O3 camera, with full support for ND filters. Immersive 155° FPV ExperienceImmerse yourself in the action with a full 155-degree field of view (FOV) for the FPV camera with no props in view. This expansive view is perfect for DJI O3 users and guarantees an immersive flight experience for both professionals and enthusiasts. Flexible Battery MountingExperiment with different battery configurations by choosing between lengthwise or toilet tank battery mounting options. This flexibility allows you to optimize your drone's balance and performance based on your flying style and preferences.   Specifications: Product Name: AOS 3.5 V5 BNF Flight Electronics: BLITZ Whoop F7 AIO Video Transmission: DJI O3 Air Unit Frame: 162±2mm wheelbase Motor: XING 1504 3100KV motors Prop: HQ 3.5*2.5*3 propellers Takeoff Weight: Approx. 197g (Without Battery) Dimensions (L×W×H)：133×93×30 mm Max Speed: 110 Km/h (Manual Mode) Maximum Takeoff Altitude: 3000 m Max Hover Time: Approx. 12 mins with 4S 850mAh no load Max Flight Distance: 2-3 km Operating Temperature Range：-10° to 40° C (14° to 104° F) Antennas: 1 Antenna(DJI O3 Air Unit Antenna) GNSS: N/A   Packing List: 1 x AOS 3.5 V5 4S HD BNF 2 x Battery pads 2 x Prop(Pairs) Characteristics Size 3.5 inch Geometry X-Frame Flight Stack BLITZ Whoop F7 AIO Motors 1504 3100KV Video Transmitter DJI O3 Air Unit Radio Transmitter DJI FPV RC2, ELRS, TBS (optional) Max. Speed 110 km/h Weight ca. 197g (without battery) Description Advanced Patent Pending Anti-Vibration TechnologySay goodbye to unwanted vibrations that can hinder your drone's performance. The AOS 3.5 V5 boasts the new patent pending AOS X-Cell anti-vibration mount for the flight control stack, reducing vibrations by up to 50% (compared to AOS 3.5 EVO). This groundbreaking feature enables you to run lower filtering, dial in higher PID gains, and achieve unparalleled flight performance. Durable and Versatile 7075 Aluminium Camera CageThe AOS 3.5 V5 is equipped with an ultra-durable 7075 Aluminium Camera Cage that accommodates all 19-20mm cameras, ensuring perfect compatibility with a wide range of camera systems. It includes an integrated soft mount specifically designed for the DJI O3 camera, with full support for ND filters. Immersive 155° FPV ExperienceImmerse yourself in the action with a full 155-degree field of view (FOV) for the FPV camera with no props in view. This expansive view is perfect for DJI O3 users and guarantees an immersive flight experience for both professionals and enthusiasts. Flexible Battery MountingExperiment with different battery configurations by choosing between lengthwise or toilet tank battery mounting options. This flexibility allows you to optimize your drone's balance and performance based on your flying style and preferences.   Specifications: Product Name: AOS 3.5 V5 BNF Flight Electronics: BLITZ Whoop F7 AIO Video Transmission: DJI O3 Air Unit Frame: 162±2mm wheelbase Motor: XING 1504 3100KV motors Prop: HQ 3.5*2.5*3 propellers Takeoff Weight: Approx. 197g (Without Battery) Dimensions (L×W×H)：133×93×30 mm Max Speed: 110 Km/h (Manual Mode) Maximum Takeoff Altitude: 3000 m Max Hover Time: Approx. 12 mins with 4S 850mAh no load Max Flight Distance: 2-3 km Operating Temperature Range：-10° to 40° C (14° to 104° F) Antennas: 1 Antenna(DJI O3 Air Unit Antenna) GNSS: N/A   Packing List: 1 x AOS 3.5 V5 4S HD BNF 2 x Battery pads 2 x Prop(Pairs) Characteristics Size 3.5 inch Geometry X-Frame Flight Stack BLITZ Whoop F7 AIO Motors 1504 3100KV Video Transmitter DJI O3 Air Unit Radio Transmitter DJI FPV RC2, ELRS, TBS (optional) Max. Speed 110 km/h Weight ca. 197g (without battery)

About Description The Protek CineWhoop has a longer flight experience and weighs less than the previous cinewhoops! The new version of Protek35 has been released, we upgraded the frame to be compatible with DJI O3 air unit. iFlight was able to increase the speed and thrust by 50% compared to its 3-inch predecessor which gives a lot more room for a lot more fun; as a result, the ProTek35 is equipped with the Butter Smooth 2205 2300KV Motors. It also features the DJI O3 air unit, BLITZ whoop F7 AIO, 55A 2-6S ESC, Nazgul 3535 propellers, and more!   Highlights No Props or frame in view! DJI O3 HD Air Unit Low-Latency digital transmission Secured Battery Plug and CNC bracket - Easy to install battery straps High-performance True-AIO Board BLITZ F7 AIO 55A to save weight and space T700 Quality Carbon - 40% more tensile strength compared to common 3K carbon Lightweight one-piece frame design - Less flexibility, more Rigid, more Durable Low Resonance frame construction - Less Jello, more Cinematic footage   Specifications Product Name: ProTek35 V1.4 O3 6S HD AIO: BLITZ Whoop F7 AIO Video Transmission: DJI O3 Air Unit  Frame: 151mm wheelbase Motor: XING 2205 2300KV motors Prop: Nazgul 3535 propellers Weight: 363 g (Without Battery) Dimensions (L×W×H): 217×194×32.5 mm Max Speed: 140 km/h Maximum Takeoff Altitude: 5000 m Max Hover Time: Approx. 6 mins（With 1400 battery no load） Max Wind Speed Resistance: Level 4 Operating Temperature Range: -10° to 40° C (14° to 104° F) Antennas: Single Antenna GNSS: N/A   Video Transmission Product Name: DJI O3 Air Unit Weight: Approx. 36.4 grams Communication Bandwidth： Max 40 MHz FOV (single screen): 155° Communication Frequency：2.400-2.4835 GHz (RX only)  /  5.725-5.850 GHz (RX and TX) End-to-End Latency With DJI FPV Goggles V2: 810p/120fps Video Transmission Quality: The latency is lower than 28 ms. 810p/60fps Video Transmission Quality: The latency is lower than 40 ms. With DJI Goggles 2: 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms. 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms. Max Video Transmission Bitrate: 50 Mbps Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC) Operating Temperature Range: -10º to 40º C (14° to 104° F) Power Input: 7.4-26.4 V  Audio Transmission: N/A   Packing List 1 x ProTek35 V1.4 O3 6S HD BNF 1 x 3.5 inch prop (2 pairs) 2 x Battery pad 1 x Battery strap   Pre-tuned and Setup for you Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience! To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps" Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess! Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"   Notice All iFlight BNFs are tested before shipment to guarantee highest quality.  If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Characteristics Size 3.5 inch Geometry Ducted Whoop Flight Stack BLITZ Whoop F7 AIO Motors 2205 2300KV Video Transmitter DJI O3 Air Unit Radio Transmitter DJI FPV RC2, ELRS, TBS (optional) Max. Speed 140 km/h Weight ca. 363g (without battery) Description The Protek CineWhoop has a longer flight experience and weighs less than the previous cinewhoops! The new version of Protek35 has been released, we upgraded the frame to be compatible with DJI O3 air unit. iFlight was able to increase the speed and thrust by 50% compared to its 3-inch predecessor which gives a lot more room for a lot more fun; as a result, the ProTek35 is equipped with the Butter Smooth 2205 2300KV Motors. It also features the DJI O3 air unit, BLITZ whoop F7 AIO, 55A 2-6S ESC, Nazgul 3535 propellers, and more!   Highlights No Props or frame in view! DJI O3 HD Air Unit Low-Latency digital transmission Secured Battery Plug and CNC bracket - Easy to install battery straps High-performance True-AIO Board BLITZ F7 AIO 55A to save weight and space T700 Quality Carbon - 40% more tensile strength compared to common 3K carbon Lightweight one-piece frame design - Less flexibility, more Rigid, more Durable Low Resonance frame construction - Less Jello, more Cinematic footage   Specifications Product Name: ProTek35 V1.4 O3 6S HD AIO: BLITZ Whoop F7 AIO Video Transmission: DJI O3 Air Unit  Frame: 151mm wheelbase Motor: XING 2205 2300KV motors Prop: Nazgul 3535 propellers Weight: 363 g (Without Battery) Dimensions (L×W×H): 217×194×32.5 mm Max Speed: 140 km/h Maximum Takeoff Altitude: 5000 m Max Hover Time: Approx. 6 mins（With 1400 battery no load） Max Wind Speed Resistance: Level 4 Operating Temperature Range: -10° to 40° C (14° to 104° F) Antennas: Single Antenna GNSS: N/A   Video Transmission Product Name: DJI O3 Air Unit Weight: Approx. 36.4 grams Communication Bandwidth： Max 40 MHz FOV (single screen): 155° Communication Frequency：2.400-2.4835 GHz (RX only)  /  5.725-5.850 GHz (RX and TX) End-to-End Latency With DJI FPV Goggles V2: 810p/120fps Video Transmission Quality: The latency is lower than 28 ms. 810p/60fps Video Transmission Quality: The latency is lower than 40 ms. With DJI Goggles 2: 1080p/100fps Video Transmission Quality: The latency is as low as 30 ms. 1080p/60fps Video Transmission Quality: The latency is as low as 40 ms. Max Video Transmission Bitrate: 50 Mbps Max Video Transmission Range：10 km (FCC), 2 km (CE), 6 km (SRRC) Operating Temperature Range: -10º to 40º C (14° to 104° F) Power Input: 7.4-26.4 V  Audio Transmission: N/A   Packing List 1 x ProTek35 V1.4 O3 6S HD BNF 1 x 3.5 inch prop (2 pairs) 2 x Battery pad 1 x Battery strap   Pre-tuned and Setup for you Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience! To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps" Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess! Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"   Notice All iFlight BNFs are tested before shipment to guarantee highest quality.  If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com. Characteristics Size 3.5 inch Geometry Ducted Whoop Flight Stack BLITZ Whoop F7 AIO Motors 2205 2300KV Video Transmitter DJI O3 Air Unit Radio Transmitter DJI FPV RC2, ELRS, TBS (optional) Max. Speed 140 km/h Weight ca. 363g (without battery)

About Description The next generation of ESCs from iFlight has arrived. Currently used in BNF quads such as the Nazgul F5/F6 Series. These new 55Amp BLHeli32 BLITZ 4in1 ESCs can handle even the most amp-hungry motors. Powerful 55A for 2-6S batteries. 30,5x30,5 mounting pattern. The perfect match for the BLITZ Flight Controller series.   Specifications: Mounting Holes: 30.5*30.5mm/Φ4mm Weight: 15.3g Supports 2-6S lipo input MCU：G071 Constant: 55 Amps  Burst: 65 Amps Current sensor: Yes BEC: No Current rate: 200 Supports: DShot DShot150/300/600/MultiShot/ OneShot etc. Target:   IFLIGHT_BLITZ_G2   Packing List: 1 x BLITZ E55 4-IN-1 2-6S ESC 1 x Power cables & ESC signal wires Description The next generation of ESCs from iFlight has arrived. Currently used in BNF quads such as the Nazgul F5/F6 Series. These new 55Amp BLHeli32 BLITZ 4in1 ESCs can handle even the most amp-hungry motors. Powerful 55A for 2-6S batteries. 30,5x30,5 mounting pattern. The perfect match for the BLITZ Flight Controller series.   Specifications: Mounting Holes: 30.5*30.5mm/Φ4mm Weight: 15.3g Supports 2-6S lipo input MCU：G071 Constant: 55 Amps  Burst: 65 Amps Current sensor: Yes BEC: No Current rate: 200 Supports: DShot DShot150/300/600/MultiShot/ OneShot etc. Target:   IFLIGHT_BLITZ_G2   Packing List: 1 x BLITZ E55 4-IN-1 2-6S ESC 1 x Power cables & ESC signal wires

About Description Replacement camera module compatible with the DJI O3 Air Unit. Description Replacement camera module compatible with the DJI O3 Air Unit.

About Description Our latest BLITZ Flight Controller used in our iFlight BNFs. Ultra fast ATF435 MCU for 2-6S batteries. 30,5x30,5 mounting pattern. The perfect match for your new frame. Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required), FC indicator LEDs for visual debugging, with LC filter.   Specifications: MCU: AT32F435CGU7 Gyro: ICM42688 Barometer: DPS310 OSD Chip: AT7456E Flash: 32MB (Blackbox flash) UARTS: 6 Motor outputs: 4x (SH1.0 connector) I2C serial: SDA / SLA pads Smartaudio / IRC Tramp VTX protocol supported LED controller: Yes Beeper pad: Yes Firmware target: IFLIGHT_BLITZ_ATF435 Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter Dimensions: 36.5*35 mm Weight: 7.8g BEC: 5V 2.5A / 9V 2A   Changelog: November 6, 2023: The flight control Gyro was changed from BMI270 to ICM42688.   Wiring Suggestion: UART 1 for VTX HD / Analog UART 2 for a Receiver UART 3/4/5 for GPS or other sensors that require a serial port UART 6 for ESC Telemet   Packing List: 1 x BLITZ ATF435 Flight Controller 1 x FC connectors (as above) 1 x Silicon grommets Description Our latest BLITZ Flight Controller used in our iFlight BNFs. Ultra fast ATF435 MCU for 2-6S batteries. 30,5x30,5 mounting pattern. The perfect match for your new frame. Improved circuit design, better components and lower electrical noise! DJI HD VTX Connector (Plug-and-Play / No soldering required), FC indicator LEDs for visual debugging, with LC filter.   Specifications: MCU: AT32F435CGU7 Gyro: ICM42688 Barometer: DPS310 OSD Chip: AT7456E Flash: 32MB (Blackbox flash) UARTS: 6 Motor outputs: 4x (SH1.0 connector) I2C serial: SDA / SLA pads Smartaudio / IRC Tramp VTX protocol supported LED controller: Yes Beeper pad: Yes Firmware target: IFLIGHT_BLITZ_ATF435 Mount pattern: 30.5*30.5mm / 4mm PCB hole diameter Dimensions: 36.5*35 mm Weight: 7.8g BEC: 5V 2.5A / 9V 2A   Changelog: November 6, 2023: The flight control Gyro was changed from BMI270 to ICM42688.   Wiring Suggestion: UART 1 for VTX HD / Analog UART 2 for a Receiver UART 3/4/5 for GPS or other sensors that require a serial port UART 6 for ESC Telemet   Packing List: 1 x BLITZ ATF435 Flight Controller 1 x FC connectors (as above) 1 x Silicon grommets

About Description GEMFAN propeller quality for your 6 inch FPV drone. Default Propeller for the iFlight BOB57 V1 and V2. Description GEMFAN propeller quality for your 6 inch FPV drone. Default Propeller for the iFlight BOB57 V1 and V2.

About Description Our latest 5600mAh 95C 6S performance LIPO for bigger FPV drones. Recommended battery for 7inch and up. XT60 and XT90 version available.   Specifications: Cell combination: 6S1P High 95C discharge rating Quality grade-A cells Compact Size Size: 160*50*50mm Weight: 855g Voltage: 22.2V Battery type: LI-PO Connector: Amass XT60H   XT60 Plug: Chimera Series, XL10 V6, CX10 XT90 Plug: Helion 10, Cinelifters Series   Packing List: 1x Fullsend X 6S 5600mAh 95C XT60 Battery Description Our latest 5600mAh 95C 6S performance LIPO for bigger FPV drones. Recommended battery for 7inch and up. XT60 and XT90 version available.   Specifications: Cell combination: 6S1P High 95C discharge rating Quality grade-A cells Compact Size Size: 160*50*50mm Weight: 855g Voltage: 22.2V Battery type: LI-PO Connector: Amass XT60H   XT60 Plug: Chimera Series, XL10 V6, CX10 XT90 Plug: Helion 10, Cinelifters Series   Packing List: 1x Fullsend X 6S 5600mAh 95C XT60 Battery